HIKVISION DS-8104AHQI-E4 User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. DVR
  5. DS-8104AHQI-E4
  6. User manual
HIKVISION DS-8104AHQI-E4 User Manual

HIKVISION DS-8104AHQI-E4 User Manual

Atm digital video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ATM Digital Video Recorder
User Manual
UD08845B

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-8104AHQI-E4 and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-8104AHQI-E4

Summary of Contents for HIKVISION DS-8104AHQI-E4

  • Page 1 ATM Digital Video Recorder User Manual UD08845B...
  • Page 2 INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.
  • Page 3 ATM Digital Video Recorder User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 4 ATM Digital Video Recorder User Manual Applicable Models This manual is applicable to the models listed in the following table. Series Model DS-8104AHQI-E4 ATM DVR DS-8104AHQLI-E4 iDS-8104AHQXLI-E4 Symbol Conventions The symbols that may be found in this document are defined as follows.
  • Page 5 ATM Digital Video Recorder User Manual Safety Instructions  Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.  In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.

  • Page 6: Product Key Features

    ATM Digital Video Recorder User Manual Product Key Features General  Connectable to HDTVI, IP and analog cameras.  Up to 8 IP cameras can be added.  Connectable to third-party IP cameras that adopt ONVIF or custom protocol.  PAL/NTSC adaptive video inputs. ...
  • Page 7 ATM Digital Video Recorder User Manual Local Monitoring  7-inch LCD display at 1024 × 600 resolution (available for DS-8104AHQLI-E4 and iDS-8104AHQXLI-E4 series)  HDMI, VGA, CVBS and LCD display outputs.  Simultaneous output of VGA and HDMI with up to 1080p resolution of VGA output and up to 4K (3840 ×...
  • Page 8 ATM Digital Video Recorder User Manual  Searching and playing back record files by events (alarm input/motion detection/smart ATM alarm).  Customization of tags, searching and playing back by tags.  Locking and unlocking record files.  Local redundant recording and capture. ...
  • Page 9 ATM Digital Video Recorder User Manual  Clear-text password available.  GUID file can be exported for password resetting.  Multiple connected analog cameras supporting HDTVI signal can be upgraded simultaneously via DVR. Network Functions  2 self-adaptive 10M/100M/1000M network interfaces, and three working modes are configurable: multi-address, load balance and network fault tolerance.
  • Page 10 ATM Digital Video Recorder User Manual  SDK for Windows and Linux system;  Source code of application software for demo;  Development support and training for application system.

  • Page 11: Table Of Contents

    ATM Digital Video Recorder User Manual Table of Contents Product Key Features ......................5 Chapter 1 Introduction ......................16 1.1 Front Panel ........................16 1.2 IR Remote Control Operations..................17 1.3 USB Mouse Operation ....................21 1.4 Input Method Description .................... 22 1.5 Rear Panel ........................
  • Page 12 ATM Digital Video Recorder User Manual 3.3 Channel-Zero Encoding ....................53 3.4 Adjusting Live View Settings ..................54 3.5 Manual Video Quality Diagnostics ................55 Chapter 4 PTZ Controls ......................57 4.1 Configuring PTZ Settings ....................57 4.2 Setting PTZ Presets, Patrols and Patterns ..............59 4.2.1 Customizing Presets ....................
  • Page 13 ATM Digital Video Recorder User Manual 6.1.5 Playing Back by Tag ................... 102 6.1.6 Playing Back by System Logs ................105 6.1.7 Playing Back by Sub-Periods ................106 6.1.8 Playing Back External File .................. 107 6.1.9 Playing Back Pictures ..................108 6.2 Auxiliary Functions of Playback ..................
  • Page 14 ATM Digital Video Recorder User Manual 10.2.3 Configuring NTP Server ................... 151 10.2.4 Configuring NAT ....................152 10.2.5 Configuring More Settings ................154 10.2.6 Configuring HTTPS Port ................... 155 10.2.7 Configuring Email .................... 157 10.3 Configuring Network Detection ................159 10.3.1 Checking Network Traffic .................
  • Page 15 ATM Digital Video Recorder User Manual 13.3 Managing HDD Group ....................188 13.3.1 Setting HDD Groups ..................188 13.3.2 Setting HDD Property ..................189 13.4 Configuring Quota Mode ..................190 13.5 Checking HDD Status ....................191 13.6 Checking S.M.A.R.T Information ................192 13.7 Detecting Bad Sector....................
  • Page 16 ATM Digital Video Recorder User Manual 17.1 Glossary ........................217 17.2 Troubleshooting ....................... 218 17.3 Summary of Chnages ....................221 17.3.1 Version 3.4.83 ....................221 17.3.2 Version 3.4.82 ....................221 17.3.3 Version 3.4.8 ....................221...

  • Page 17: Chapter 1 Introduction

    Chapter 1 Introduction 1.1 Front Panel Refer to Figure 1-1 for the front panel of DS-8104AHQLI-E4 and iDS-8104AHQXLI-E4. Figure 1-1 Front Panel There is no LCD screen for DS-8104AHQI-E4 series ATM DVR. Table 1-1 Description of Front Panel No. Name Function Description The DIRECTION buttons are used to navigate between different fields and items in menus.

  • Page 18: Ir Remote Control Operations

    ATM Digital Video Recorder User Manual button is used to confirm selection in any of the menu modes. It can also be used to tick checkbox fields. In Playback mode, it can be used to play or pause the video. ENTER In single-frame Playback mode, pressing the button will advance the video by a single frame.
  • Page 19 ATM Digital Video Recorder User Manual Figure 1-2 Remote Control The keys on the remote control closely resemble the ones found on the front panel. Refer to Table 1-2, they include: Table 1-2 Description of the IR Remote Control Buttons No.
  • Page 20 ATM Digital Video Recorder User Manual Enter/exit the folder of USB device and HDD. Adjust focus in the PTZ Control menu. A Button It is also used to switch input methods (upper and lowercase alphabet, symbols and numeric input). Enter the Manual Record setting menu. In PTZ control settings, press the button and then you can call a PTZ REC Button preset by pressing Numeric button.
  • Page 21 ATM Digital Video Recorder User Manual LEFT button is used to jump 30s backward; the RIGHT button is used to jump 30s forward. In PTZ control mode, the DIRECTION buttons are used to control the movement of PTZ camera. The ENTER button is used to confirm the selection in menu mode. The ENTER button is used to check the checkbox or switch the ON/OFF.

  • Page 22: Usb Mouse Operation

    ATM Digital Video Recorder User Manual Step 2 Check and remember the DVR No. The default DVR No. is 255. This number valid for all IR remote controls. Step 3 Press the DEV button on the remote control. Step 4 Enter the DVR No. in step 2. Step 5 Press the ENTER button on the remote.

  • Page 23: Input Method Description

    ATM Digital Video Recorder User Manual Live view: Show menu. Right-Click Single-Click Menu: Exit current menu to upper level menu. Live view: Previous screen. Scrolling up Menu: Previous item. Scroll-Wheel Live view: Next screen. Scrolling down Menu: Next item. 1.4 Input Method Description Figure 1-3 Soft Keyboard Description of the buttons on the soft keyboard: Table 1-4 Description of the Soft Keyboard Icons...
  • Page 24 ATM Digital Video Recorder User Manual Figure 1-4 Rear Panel Table 1-5 Description of Rear Panel No. Item Description VIDEO IN BNC connector for analog video input. AUDIO IN BNC connector for audio input. LINE IN BNC connector for two-way audio. AUDIO OUT BNC connector for audio output.
  • Page 25 ATM Digital Video Recorder User Manual Power Switch Switch for turning on/off the device. Power Supply 100 to 240 VAC power supply.

  • Page 26: Chapter 2 Getting Started

    ATM Digital Video Recorder User Manual Chapter 2 Getting Started 2.1 Starting Up and Shutting Down the DVR Purpose Proper startup and shutdown procedures are crucial to expanding the life of the DVR. Before you start Check that the voltage of the extra power supply is the same with the DVR’s requirement, and the ground connection is working properly.

  • Page 27: Activating The Device

    ATM Digital Video Recorder User Manual Figure 2-2 Shutdown Tips Rebooting the DVR While in the Shutdown menu (Figure 2-1), you can also reboot the DVR. Step 1 Enter the Shutdown menu by clicking Menu > Shutdown. Step 2 Click the Logout button to log out or the Reboot button to reboot the DVR. 2.2 Activating the Device Purpose For the first-time access, you need to activate the device by setting an admin password.
  • Page 28 ATM Digital Video Recorder User Manual Step 2 Click OK to save the password and activate the device.  Clear-text password is supported. Click the icon and you can see the clear text of the password. Click the icon again and the content of the password restores invisible. ...

  • Page 29: Using The Unlock Pattern For Login

    ATM Digital Video Recorder User Manual Step 5 After exporting GUID, the Attention box pops up as below. Click Yes to duplicate the password or No to cancel it. Figure 2-7 Duplicate the Password 2.3 Using the Unlock Pattern for Login Purpose For the admin, you can configure the unlock pattern for device login.
  • Page 30 ATM Digital Video Recorder User Manual Figure 2-9 Draw the Pattern  Connect at least 4 dots to draw the pattern.  Each dot can be connected for once only. Step 2 Draw the same pattern again to confirm it. When the two patterns match, the pattern is configured successfully.

  • Page 31: Logging In Via Unlock Pattern

    ATM Digital Video Recorder User Manual Figure 2-11 Reset the Pattern 2.3.2 Logging in via Unlock Pattern  Only the admin user has the permission to unlock the device.  Please configure the pattern first before unlocking. Please refer to Chapter 2.3.1 Configuring the Unlock Pattern.

  • Page 32: Basic Configuration In Startup Wizard

    ATM Digital Video Recorder User Manual Figure 2-13 Normal Login Dialog Box Figure 2-14 Lock the Account 2.4 Basic Configuration in Startup Wizard 2.4.1 Configuring the Signal Input Wizard Purpose You can configure the analog and IP signal input types and the connectable maximum IP camera number.

  • Page 33: Using The Wizard For Basic Configuration

    ATM Digital Video Recorder User Manual Figure 2-15 Configure Signal Input Type For detailed information of signal input, you can refer to Chapter 2.9 Configuring Signal Input Channel for reference. 2.4.2 Using the Wizard for Basic Configuration Purpose By default, the Setup Wizard starts once the device has loaded. You can follow it to complete the basic configuration.
  • Page 34 ATM Digital Video Recorder User Manual Figure 2-17 Start Wizard Interface Step 2 Click Next button to enter the Date and Time Settings interface. Figure 2-18 Date and Time Settings Step 3 After the time settings, click Next button to enter the General Network Setup Wizard interface as shown below.
  • Page 35 ATM Digital Video Recorder User Manual Figure 2-19 General Network Configuration If DHCP is enabled, you can check the checkbox of Enable DNS DHCP or uncheck it and edit the Preferred DNS Server and Alternate DNS Server. Step 4 Click Next button and you can enter the RAID configuration interface. Check the checkbox of Enable RAID to take this function into effect.
  • Page 36 ATM Digital Video Recorder User Manual Figure 2-21 HDD Management Step 6 Click Next button to enter the IP Camera Management interface. Step 7 Add the IP camera. 1) Click Search to search the online IP Camera. The Security status shows whether it is active or inactive.

  • Page 37: Login And Logout

    ATM Digital Video Recorder User Manual Click , and you can enable the continuous recording or motion detection recording for all channels of the device. Figure 2-23 Record Settings Step 9 Click OK to complete the wizard settings. 2.5 Login and Logout 2.5.1 User Login Purpose You have to log in to the device before operating the menu and other functions...

  • Page 38: User Logout

    ATM Digital Video Recorder User Manual Figure 2-25 User Account Protection for the Admin Figure 2-26 User Account Protection for the Operator 2.5.2 User Logout Purpose After logging out, the monitor turns to the live view mode and if you want to perform some operations, you need to enter the user name and password to log in again.
  • Page 39 ATM Digital Video Recorder User Manual Figure 2-28 Import GUID Step 2 Select the GUID file from the USB flash disk and click Import button to pop up the Reset Password interface. Figure 2-29 Reset Password Step 3 Input the new password and confirm the password. Step 4 Click OK to save the new password.

  • Page 40: Adding And Connecting The Ip Cameras

    ATM Digital Video Recorder User Manual Figure 2-31 Duplicate the Password  If you want to retrieve the password when you forget it, you must export the GUID file first.  Once the password is reset, the GUID file will be invalid. You can export a new GUID file. Refer to Chapter 17.5.3 Editing a User for reference.

  • Page 41: Adding The Online Ip Camera

    ATM Digital Video Recorder User Manual Figure 2-33 Activate the Camera Step 3 Set the password of the camera to activate it. Use Admin Password: When you check the checkbox, the camera (s) will be configured with the same admin password of the operating DVR. Create New Password: If the admin password is not used, you must create the new password for the camera and confirm it.
  • Page 42 ATM Digital Video Recorder User Manual Ensure the network connection is valid and correct. For detailed checking and configuring of the network, please see Chapter 12 Network Settings.  OPTION 1: Step 1 Select the Add IP Camera option from the right-click menu in live view mode or click Menu>...
  • Page 43 ATM Digital Video Recorder User Manual Figure 2-36 Select Multiple Channels  OPTION 2: Step 1 On the IP Camera Management interface, click the Custom Adding button to pop up the Add IP Camera (Custom) interface. Figure 2-37 Custom Adding IP Camera Interface Step 2 You can edit the IP address, protocol, management port, and other information of the IP camera to be added.
  • Page 44 ATM Digital Video Recorder User Manual For the successfully added IP cameras, the Security status shows the security level of the password of camera: strong password, weak password and risky password. Figure 2-38 Successfully Added IP Cameras Please refer to specifications for the number of connectable IP cameras. Table 2-1 Explanation of the Icons Icon Explanation...

  • Page 45: Editing The Connected Ip Camera

    ATM Digital Video Recorder User Manual 2.7.3 Editing the Connected IP Camera Purpose After the adding of the IP cameras, the basic information of the camera is listed on the interface, and you can configure the basic settings of the IP cameras. Step 1 Click the icon to edit the parameters.

  • Page 46: Configuring Custom Protocols

    ATM Digital Video Recorder User Manual Figure 2-41 Password Configuration of the Camera Step 5 Click OK to save the settings and exit the interface. 2.8 Configuring Custom Protocols Purpose Custom protocols can be set for the network cameras which are not configured with the standard protocols.

  • Page 47: Configuring Signal Input Channel

    ATM Digital Video Recorder User Manual  Enable Sub-stream: If the network camera does not support sub-stream or the sub-stream is not needed, leave the checkbox empty.  Type: The network camera adopting custom protocol must support getting stream through standard RTSP. ...
  • Page 48 ATM Digital Video Recorder User Manual If you select HD/CVBS, the analog signal inputs can be connected randomly for the selected channel. If you select IP, IP camera can be connected for the selected channel. Step 3 View the Max. IP Camera Number. Step 4 Click Apply to save the settings.

  • Page 49: Chapter 3 Live View

    ATM Digital Video Recorder User Manual Chapter 3 Live View 3.1 Introduction of Live View Live view shows you the video image getting from each camera in real time. The DVR will automatically enter Live View mode when powered on. It is also at the very top of the menu hierarchy, thus hitting the ESC many times (depending on which menu you’re on) will bring you to the Live View mode.

  • Page 50: Using The Mouse In Live View

    For DS-8104AHQLI-E4 and iDS-8104AHQXLI-E4, the main output priority is HDMI/VGA > LCD. For DS-8104AHQI-E4, the main output is HDMI/VGA. The priority relationship is shown as Table 3-2. Table 3-2 Priorities of Outputs...
  • Page 51 ATM Digital Video Recorder User Manual Table 3-3 Mouse Operation in Live View Name Description Menu Enter the main menu of the system by right-clicking the mouse. Switch to the single full screen by choosing channel number from the Single Screen drop-down list.

  • Page 52: Switching Main/Aux Output

    ATM Digital Video Recorder User Manual Display/Hide Transaction Enable/disable the overlay of transaction information. Information Figure 3-1 Right-Click Menu 3.2.2 Switching Main/Aux Output Purpose For DS-8104AHQLI-E4 and iDS-8104AHQXLI-E4, you can switch the main and auxiliary output. Step 1 Use the mouse wheel to double-click on the HDMI/VGA output screen, and the following message box pops up.

  • Page 53: Quick Setting Toolbar In Live View Mode

    You can select the Menu Output Mode under Menu>Configuration>General>More Settings to Auto, HDMI/VGA and LCD (for DS-8104AHQLI-E4 and iDS-8104AHQXLI-E4) or Auto, and HDMI/VGA (for DS-8104AHQI-E4), and then reboot the device to switch the main output. 3.2.3 Quick Setting Toolbar in Live View Mode On the screen of each channel, there is a quick setting toolbar which shows when you click the screen.

  • Page 54: Channel-Zero Encoding

    ATM Digital Video Recorder User Manual Image Settings icon can be selected to enter the Image Settings menu. You can drag the mouse or click to adjust the image parameters, including brightness, contrast, and saturation. Refer to the Chapter 14.3 Configuring Video Parameters for details. Figure 3-5 Image Settings Move the mouse onto the Information icon to show the real-time stream information, including the frame rate, bit rate, resolution and stream type.

  • Page 55: Adjusting Live View Settings

     Video Output Interface: Selects the output to configure the settings. For DS-8104AHQI-E4, you can select VGA/HDMI, and Main CVBS for video output interface. For DS-8104AHQLI-E4 and iDS-8104AHQXLI-E4, you can select VGA/HDMI, LCD, and Main CVBS for video output interface.

  • Page 56: Manual Video Quality Diagnostics

    ATM Digital Video Recorder User Manual  Enable Audio Output: Enables/disables audio output for the selected camera in the live view mode.  Volume: Adjust the volume of the audio output.  Event Output: Designates the output to show event video. If available, you can select a different video output interface from the Video Output Interface when an event occurs.
  • Page 57 ATM Digital Video Recorder User Manual Figure 3-10 Video Quality Diagnostics Step 2 Check the checkboxes to select the channels for diagnostics. Step 3 Click the button Diagnose, and the results will be displayed on a list. You can view the video status and diagnostics time of the selected channels.

  • Page 58: Chapter 4 Ptz Controls

    ATM Digital Video Recorder User Manual Chapter 4 PTZ Controls 4.1 Configuring PTZ Settings Purpose Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before you control the PTZ camera. Before you start Make sure that the PTZ camera and the device are connected properly via RS-485 interface.
  • Page 59  All the parameters should be exactly the same as the PTZ camera parameters.  For the Coaxitron camera/dome connected, you can select the PTZ protocol to HIKVISION-C (Coaxitron). Make sure the protocol selected here is supported by the connected camera/dome.

  • Page 60: Setting Ptz Presets, Patrols And Patterns

    ATM Digital Video Recorder User Manual Step 7 (Optional) Check the checkbox of Enable Omnicast Control to enable the PTZ control of the selected camera via Omnicast VMS of Genetec. 4.2 Setting PTZ Presets, Patrols and Patterns Before you start Please make sure that the presets, patrols and patterns should be supported by PTZ protocols.

  • Page 61: Calling Presets

    Step 4 Click to enter the preset No. in the corresponding text field. Step 5 Click the Call Preset button to call it. When the Coaxitron camera/dome connected and the PTZ protocol is selected to HIKVISION-C (Coaxitron), you can call the preset 95 to enter the menu of the connected Coaxitron camera/dome.

  • Page 62: Calling Patrols

    ATM Digital Video Recorder User Manual Figure 4-6 PTZ Settings Step 2 Select patrol No. in the drop-down list of patrol. Step 3 Click the Set button to add key points for the patrol. Figure 4-7 Key point Configuration Step 4 Configure key point parameters, such as the key point No., duration of staying for one key point and speed of patrol.

  • Page 63: Customizing Patterns

    ATM Digital Video Recorder User Manual Step 1 Click the button PTZ in the lower-right corner of the PTZ Settings interface; Or press the PTZ button on the front panel or click the PTZ Control icon in the quick setting bar, or select the PTZ option in the right-click menu to show the PTZ control panel. Step 2 Click the General tab to show the general settings of the PTZ control.

  • Page 64: Calling Patterns

    ATM Digital Video Recorder User Manual Figure 4-9 PTZ Settings Step 2 Choose pattern number in the drop-down list. Step 3 Click the Start button and click corresponding buttons in the control panel to move the PTZ camera, and click the Stop button to stop it. The movement of the PTZ is recorded as the pattern.

  • Page 65: Customizing Linear Scan Limit

    ATM Digital Video Recorder User Manual Figure 4-10 PTZ Panel - General Step 3 Click the Call Pattern button to call it. Step 4 Click the Stop Pattern button to stop calling it. 4.2.7 Customizing Linear Scan Limit Purpose The Linear Scan can be enabled to trigger the scan in the horizantal direction in the predefined range.

  • Page 66: Calling Linear Scan

    ATM Digital Video Recorder User Manual Figure 4-11 PTZ Settings Step 2 Use the directional button to wheel the camera to the location where you want to set the limit, and click the Left Limit or Right Limit button to link the location to the corresponding limit.

  • Page 67: One-Touch Park

    ATM Digital Video Recorder User Manual Figure 4-12 PTZ Panel - One-touch Step 3 Click Linear Scan button to start the linear scan and click the Linear Scan button again to stop it. You can click the Restore button to clear the defined left limit and right limit data and the dome needs to reboot to make settings take effect.

  • Page 68: Ptz Control Panel

    ATM Digital Video Recorder User Manual Step 3 There are 3 one-touch park types selectable. Click the corresponding button to activate the park action. Park (Quick Patrol): The dome starts patrol from the predefined preset 1 to preset 32 in order after the park time.
  • Page 69 ATM Digital Video Recorder User Manual Figure 4-14 PTZ Control Panel You can refer to Table 4-1 for the description of the PTZ panel icons. Table 4-1 Description of the PTZ Panel Icons Icon Description Icon Description Icon Description Direction Zoom+, Focus+, Zoom-, Focus-, button and the...

  • Page 70: Chapter 5 Recording And Capture Settings

    ATM Digital Video Recorder User Manual Chapter 5 Recording and Capture Settings 5.1 Configuring Encoding Parameters Before you start Step 1 Make sure that the HDD has already been installed. If not, please install a HDD and initialize it. (Menu>HDD>General) Figure 5-1 HDD-General Step 2 Click Advanced tab to check the storage mode of the HDD.
  • Page 71 ATM Digital Video Recorder User Manual Figure 5-3 Record Parameters Step 2 Set the parameters for recording. 1) Select the Record tab to configure. 2) Select a camera from the camera drop-down list. 3) View the Camera Resolution. 4) Configure the following parameters for the Main Stream (Continuous) and the Main Stream (Event).
  • Page 72 Bitrate (Kbps) can be configured.  For the connnected IP camera, the H.264+ should be supported by the camera and added to the DVR via the HIKVISION protocol.  You should reboot the device to activate the new settings after enabling the H.264+.
  • Page 73 ATM Digital Video Recorder User Manual  The Redundant Record option is only available when the HDD mode is Group.  Redundant HDD is required for the redundant record function. For detailed information, see Chapter 14.3.2 Setting HDD Property.  For network cameras, the parameters of Main Stream (Event) are not editable. Step 5 Click Apply to save the settings.

  • Page 74: Configuring Recording And Capture Schedule

    ATM Digital Video Recorder User Manual Figure 5-7 Capture Settings 2) Select a camera in the camera drop-down list. 3) Configure the parameters. 4) Click Apply to save the settings. 5) (Optional) If the parameters can also be used to other cameras, click Copy to copy the settings to other channels.
  • Page 75 ATM Digital Video Recorder User Manual Figure 5-8 Record Schedule Different recording types are marked in different color icons. Continuous: scheduled recording. Event: recording triggered by all event triggered alarm. Motion: recording triggered by motion detection. Alarm: recording triggered by alarm. M | A: recording triggered by either motion detection or alarm.
  • Page 76 ATM Digital Video Recorder User Manual Figure 5-9 Edit Schedule- All Day 4) To arrange other schedule, leave the All Day checkbox blank and set the Start/End time. Figure 5-10 Edit Schedule- Set Time Period  Up to 8 periods can be configured for each day. And the time periods cannot be overlapped with each other.
  • Page 77 ATM Digital Video Recorder User Manual Figure 5-11 Copy Schedule to Other Days The Holiday option is available when you enable holiday schedule in Holiday settings. See Chapter 5.7 Configuring Holiday Record. 6) Click OK to save setting and back to upper level menu. Draw the schedule 1) Click on the color icon to select a record type in the event list on the right-side of the interface.

  • Page 78: Configuring Motion Detection Recording And Capture

    ATM Digital Video Recorder User Manual Figure 5-13 Draw the Capture Schedule 2) Drag the mouse on the schedule. 3) Click on the other area except for the schedule table to finish and exit from the drawing. You can repeat step 4 to set schedule for other channels. If the settings can also be used to other channels, click Copy, and then select the channel to which you want to copy to.
  • Page 79 ATM Digital Video Recorder User Manual Figure 5-14 Motion Detection Step 2 Configure Motion Detection: 1) Select the camera you want to configure. 2) Check the checkbox of Enable Motion Detection. 3) Drag and draw the area for motion detection by mouse. If you want to set the motion detection for all the area shot by the camera, click Full Screen.

  • Page 80: Configuring Alarm Triggered Recording And Capture

    ATM Digital Video Recorder User Manual Figure 5-16 Motion Detection Settings 5) Select the channels which you want the motion detection event to trigger recording. 6) Click Apply to save the settings. 7) Click OK to return to the upper level menu. 8) Click Apply in the Motion Detection interface to save the settings.
  • Page 81 ATM Digital Video Recorder User Manual Figure 5-17 Alarm Settings Step 2 Click Alarm Input tab. Figure 5-18 Alarm Settings- Alarm Input Step 3 Select Alarm Input No. Step 4 Input Alarm Name. Step 5 Select N.O (normally open) or N.C (normally closed) for alarm type. Step 6 Check the checkbox of Enable to enable alarm.
  • Page 82 ATM Digital Video Recorder User Manual Figure 5-19 Alarm Handling Step 8 Click Apply to save the settings. Repeat the steps from 1 to 8 to configure other alarm input parameters. If the settings can also be applied to other alarm inputs, click Copy and select the alarm input number.

  • Page 83: Configuring Command Triggered Recording And Capture

    ATM Digital Video Recorder User Manual 5.5 Configuring Command Triggered Recording and Capture Before you start Connect the device to the ATM machine properly. Purpose When some transaction behaviors, such as Card In, Withdrawal, Query, etc., occur on the ATM machine, the recording/capture process will be triggered.
  • Page 84 ATM Digital Video Recorder User Manual Figure 5-22 Manual Record Step 2 Enable manual record. Click the status icon before camera No. to change it to Or click the status icon of Analog or IP Camera to enable manual record of all channels. Step 3 Disable manual record.

  • Page 85: Configuring Holiday Recording And Capture

    ATM Digital Video Recorder User Manual Figure 5-25 Smart ATM Recording 2) Click Yes to enable all-day continuous recording, all-day motion detection recording, or all-day smart ATM recording of all channels. Step 5 Configure continuous capture. 1) Click Continuous Capture tab on the left bar. Figure 5-26 Continuous Capture 2) Click the status button before camera No.
  • Page 86 ATM Digital Video Recorder User Manual Figure 5-27 Holiday Settings Step 3 Enable Edit Holiday schedule. 1) Click to enter the Edit interface. Figure 5-28 Edit Holiday Settings 2) Check the checkbox of Enable. 3) Select Mode from the drop-down list. There are three different modes for the date format to configure holiday schedule.

  • Page 87: Configuring Redundant Recording And Capture

    ATM Digital Video Recorder User Manual Figure 5-29 Edit Schedule- Holiday  Up to 8 periods can be configured for each day. And the time periods cannot be overlapped each other.  In the time table of the channel, both holiday schedule and normal day schedule are displayed.
  • Page 88 ATM Digital Video Recorder User Manual 1) Set the HDD property to Redundant. Figure 5-31 HDD General-Editing 2) Click Apply to save the settings. 3) Click OK to back to the upper level menu. Step 3 Enter the Record setting interface. Menu>...

  • Page 89: Configuring Hdd Group

    ATM Digital Video Recorder User Manual 5.9 Configuring HDD Group Purpose You can group the HDDs and save the record files in certain HDD group. Step 1 Enter HDD setting interface. Menu>HDD>Advanced Step 2 Select Storage Mode tab. Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed information, please refer to Chapter 13.3 Managing HDD Group.

  • Page 90: Files Protection

    ATM Digital Video Recorder User Manual 2) Select Group number in the drop-down list of Record on HDD Group 3) Check the channels you want to save in this group. 4) Click Apply to save settings. After you have configured the HDD groups, you can configure the recording settings following the procedure provided in Chapter 5.2-5.7.
  • Page 91 ATM Digital Video Recorder User Manual Figure 5-35 Export-Search Result Step 5 Protect the record files. 1) Find the record files you want to protect, and then click the icon which will turn to indicating that the file is locked. The record files of which the recording is still not completed cannot be locked.

  • Page 92: One-Key Enabling And Disabling H.264+ For Analog Cameras

    ATM Digital Video Recorder User Manual Figure 5-37 HDD General- Editing Step 3 Set the HDD to Read-only. Step 4 Click OK to save settings and back to the upper level menu.  You cannot save any files in a Read-only HDD. If you want to save files in the HDD, change the property to R/W.
  • Page 93 ATM Digital Video Recorder User Manual Figure 5-39 Attention Box Step 4 Click Yes to enable the function and reboot the device to have new settings taken effect. If H.264+ is already enabled for all the analog cameras, when you click Enable button, the following attention box pops up to remind you that H.264+ is already enabled for all analog cameras.
  • Page 94 ATM Digital Video Recorder User Manual Figure 5-43 Attention Box...

  • Page 95: Chapter 6 Playback

    ATM Digital Video Recorder User Manual Chapter 6 Playback 6.1 Playing Back Record Files 6.1.1 Instant Playback Purpose Play back the recorded video files of a specific channel in the live view mode. Channel switch is supported. Instant playback by channel Select a channel in live view mode and click the button in the quick setting toolbar.
  • Page 96 ATM Digital Video Recorder User Manual Figure 6-2 Right-Click Menu in Live View Playback by Time Purpose Play back video files recorded in specified time duration. Multi-channel simultaneous playback and channel switch are supported. Step 1 Enter Playback interface. Menu>Playback Step 2 Check the checkbox of channel in the channel list and then double-click to select a date on the calendar.
  • Page 97 ATM Digital Video Recorder User Manual You can also use the toolbar in the bottom part of Playback interface to control playing progress, as shown in the following figure. Figure 6-4 Playback Interface Select the channel(s) if you want to switch playback to another channel or execute simultaneous playback of multiple channels.

  • Page 98: Playing Back By Atm Information

    ATM Digital Video Recorder User Manual Button Operation Button Operation Button Operation play/Pause 30s forward 30s reverse Pause/Play Fast forward Previous day Slow forward Full Screen Exit Next day Scaling Save the clips Process bar up/down time line Display/Hide transaction information ...
  • Page 99 ATM Digital Video Recorder User Manual Figure 6-6 Video Search by ATM Information Step 3 Check the checkbox of the channel in the channel list, and specify the start and end time for search. Step 4 Click ATM in the lower-right corner to enter the ATM Settings interface. 1) Input the Card No., Transaction Amount and then select the Transaction Type from the drop-down list for video search.
  • Page 100 ATM Digital Video Recorder User Manual Figure 6-7 ATM Parameters Step 5 Click Search, and the record files matching the search conditions will be displayed on a list. Figure 6-8 Result of Video Search by ATM Information Step 6 Click to play back the record files.

  • Page 101: Playing Back By Event Search

    ATM Digital Video Recorder User Manual Figure 6-9 Interface of Playback by ATM Information 6.1.4 Playing Back by Event Search Purpose Play back record files on one or several channels searched out by restricting event types (motion detection or alarm input). Channel switch is supported. For DS-8104AHQ(L)I-E4, motion detection and alarm input can be selected for the event types.
  • Page 102 ATM Digital Video Recorder User Manual Figure 6-10 Video Search by Motion Detection Step 4 Click Search, and the record files matching the search conditions will be displayed on a list. Step 5 Select and click to play back the record files. You can click Back button to return to the search interface.

  • Page 103: Playing Back By Tag

    ATM Digital Video Recorder User Manual Figure 6-12 Interface of Playback by Event Pre-play and post-play can be configured for the playback of event triggered record files. Pre-play: The time you set to play back before the event. For example, when an alarm triggered the recording at 10:00, if you set the pre-play time as 5 seconds, the video plays back from 9:59:55.
  • Page 104 ATM Digital Video Recorder User Manual Figure 6-13 Interface of Playback by Time Step 3 Click to add default tag. Step 4 Click to add customized tag and input tag name. Figure 6-14 Add Tag Max. 64 tags can be added to a single video file. Step 5 Click to check, edit and delete tag(s).
  • Page 105 ATM Digital Video Recorder User Manual Figure 6-15 Tag Management Interface Steps Step 1 Select Tag from the drop-down list in the Playback interface. Step 2 Select channels, edit start time and end time, and then click Search to enter Search Result interface.

  • Page 106: Playing Back By System Logs

    ATM Digital Video Recorder User Manual  Pre-play and post-play can be configured.  You can click to select the previous or next tag. Please refer to Table 6-1 for the description of buttons on the toolbar. 6.1.6 Playing Back by System Logs Purpose Play back record file(s) associated with channels after searching system logs.

  • Page 107: Playing Back By Sub-Periods

    ATM Digital Video Recorder User Manual Figure 6-18 Result of System Log Search Step 3 Select a log with record file and click to enter Playback interface. If there is no record file at the time point of the log, the message box “No result found” will pop Step 4 Playback management.

  • Page 108: Playing Back External File

    ATM Digital Video Recorder User Manual Step 3 Select a date and start playing the video file. Step 4 Select the Split-screen Number from the drop-down list. Up to 4 screens are configurable. Figure 6-20 Interface of Sub-periods Playback According to the defined number of split-screens, the video files on the selected date can be divided into average segments for playback.

  • Page 109: Playing Back Pictures

    ATM Digital Video Recorder User Manual Figure 6-21 Interface of External File Playback 6.1.9 Playing Back Pictures Purpose The captured pictures stored in the HDDs of the device can be searched and viewed. Step 1 Enter Playback interface. Menu>Playback Step 2 Select Picture from the drop-down list in the upper-left corner of the page to enter the Picture Playback interface.

  • Page 110: Auxiliary Functions Of Playback

    ATM Digital Video Recorder User Manual Figure 6-22 Result of Picture Playback Step 6 The toolbar in the bottom part of Playback interface can be used to control playing process. Figure 6-23 Picture Playback Toolbar Table 6-2 Detailed Explanation of Picture-playback Toolbar Button Function Button...

  • Page 111: Digital Zoom

    ATM Digital Video Recorder User Manual 6.2.2 Digital Zoom Step 1 Click the button on the playback control bar to enter Digital Zoom interface. Step 2 Use the mouse to draw a red rectangle and the image within it will be enlarged up to 16 times.
  • Page 112 ATM Digital Video Recorder User Manual Figure 6-25 4-ch Synchronous Playback Interface Step 3 Click to play back the record files reversely.

  • Page 113: Chapter 7 Backup

    ATM Digital Video Recorder User Manual Chapter 7 Backup 7.1 Backing up Record Files Before you start Please insert the backup device(s) into the device. 7.1.1 Quick Export Purpose Export record files to backup device(s) quickly. Step 1 Enter Normal Export interface. Menu >...

  • Page 114: Backing Up By Normal Video/Picture Search

    ATM Digital Video Recorder User Manual Figure 7-2 Quick Export Using USB1-1 Step 4 Select the backup device from the drop-down list and click Export. The record files within the start time and end time will be exported to the external storage device (e.g., USB Flash Drive) after the backup process is complete.
  • Page 115 ATM Digital Video Recorder User Manual Backup using USB flash drives and USB HDDs Step 1 Enter Export interface. Menu>Export>Normal/Picture Step 2 Select the cameras to search. Step 3 Set search condition and click Search to enter the search result interface. Figure 7-4 Normal Video Search for Backup Step 4 The matched video files are displayed in Chart or List display mode.
  • Page 116 ATM Digital Video Recorder User Manual Figure 7-5 Result of Normal Video Search for Backup Step 5 Select video files from the Chart or List to export, and click Export to enter the Export interface. You can also click Export All to select all the video files for backup and enter the Export interface.

  • Page 117: Backing Up By Event Search

    ATM Digital Video Recorder User Manual Figure 7-7 Export Finished The backup of pictures using USB writer or SATA writer has the same operating instructions. Please refer to steps described above. 7.1.3 Backing up by Event Search Purpose Back up event-related record files using USB devices (USB flash drives, USB HDDs, USB writer), SATA writer or eSATA HDD.

  • Page 118: Backing Up Video Clips

    ATM Digital Video Recorder User Manual Step 5 Select video files from the Chart or List interface to export. Figure 7-9 Result of Event Search Step 6 Export the video files. Please refer to step 5 of Chapter 7.1.2 Backing up by Normal Video/Picture Search for details.

  • Page 119: Managing Backup Devices

    ATM Digital Video Recorder User Manual Step 4 Export the video clips in playback. Please refer to step 5 of Chapter 7.1.2 Backing up by Normal Video/Picture Search for details. 7.2 Managing Backup Devices Step 1 Enter the Export interface. Figure 7-11 Storage Device Management Step 2 Backup device management.

  • Page 120: Chapter 8 Alarm Settings

    ATM Digital Video Recorder User Manual Chapter 8 Alarm Settings 8.1 Setting Motion Detection Step 1 Enter Motion Detection interface of Camera Management. Menu> Camera> Motion Figure 8-1 Motion Detection Setup Interface Step 2 Select a camera you want to set up motion detection. Step 3 Check checkbox to enable motion detection.
  • Page 121 ATM Digital Video Recorder User Manual 1) Click Trigger Channel tab and select one or more channels which will start to record or become full-screen monitoring when motion alarm is triggered. Figure 8-3 Set Trigger Camera of Motion Detection 2) Select Arming Schedule tab to set the channel’s arming schedule. Select one day of a week and up to eight time periods can be set within each day.

  • Page 122: Setting Sensor Alarms

    ATM Digital Video Recorder User Manual 8.2 Setting Sensor Alarms Purpose Set up handling method of an external sensor alarm. Step 1 Enter Alarm Input Settings interface. Menu > Configuration > Alarm > Alarm Input Figure 8-5 Alarm Input Settings Interface Step 2 Select the alarm input.
  • Page 123 ATM Digital Video Recorder User Manual Time periods shall not be repeated or overlapped. 3) Select Linkage Action tab to set up alarm response actions of the alarm input (Refer to Chapter 8.7 Setting Alarm Response Actions). 4) (Optional) Select PTZ Linking tab and set PTZ linkage of the alarm input. Set PTZ linking parameters and click OK to complete the settings of the alarm input.

  • Page 124: Detecting Video Loss

    ATM Digital Video Recorder User Manual Figure 8-8 Copy Settings of Alarm Input 8.3 Detecting Video Loss Purpose Detect video loss of a channel and take alarm response action(s). Step 1 Enter Video Loss interface of Camera Management. Menu> Camera> Video Loss Figure 8-9 Video Loss Setup Interface Step 2 Select a channel you want to detect.

  • Page 125: Detecting Video Tampering

    ATM Digital Video Recorder User Manual Select one day of a week and up to eight time periods can be set within each day. Or you can click Copy to copy the time period settings to other day(s). Time periods shall not be repeated or overlapped. Figure 8-10 Set Arming Schedule of Video Loss 2) Select Linkage Action tab to set up alarm response actions of video loss (Refer to Chapter 8.7 Setting Alarm Response Actions).
  • Page 126 ATM Digital Video Recorder User Manual Figure 8-11 Video Tampering Interface Step 2 Select a channel you want to detect video tampering. Step 3 Check the checkbox of Enable Video Tampering Detection. Step 4 Drag the sensitivity bar to set a proper sensitivity level. Step 5 Click to set handling method of video tampering.

  • Page 127: Setting All-Day Video Quality Diagnostics

    ATM Digital Video Recorder User Manual Step 6 Repeat the above steps to finish settings of other channels, or click Copy to copy the above settings to them. Step 7 Click Apply to save the settings. 8.5 Setting All-day Video Quality Diagnostics Purpose The device provides two ways to diagnose the video quality: manual and all-day.

  • Page 128: Handling Exceptions

    ATM Digital Video Recorder User Manual Select one day of a week and up to eight time periods can be set within each day. Or you can click Copy to copy the time period settings to other day(s). Time periods shall not be repeated or overlapped. Figure 8-14 Set Arming Schedule of Video Quality Diagnostics 2) Select Linkage Action tab to set alarm response actions of video quality diagnostics alarm (Refer to Chapter 8.7 Setting Alarm Response Actions).
  • Page 129 ATM Digital Video Recorder User Manual  Record/Capture Exception: No space for saving recorded files or captured pictures. Step 1 Enter Exceptions interface and handle various exceptions. Menu> Configuration> Exceptions Figure 8-15 Exception Settings Interface Step 2 Check the checkbox of Enable Event Hint to display (Event/Exception icon) when an exceptional event occurs.

  • Page 130: Setting Alarm Response Actions

    ATM Digital Video Recorder User Manual Figure 8-17 Detailed Event Step 4 Select the Exception Type. Step 5 Check the checkbox to set the alarm linkage actions. For details, refer to Chapter 8.7 Setting Alarm Response Actions. Step 6 Click Apply to save the settings. 8.7 Setting Alarm Response Actions Purpose Alarm response actions will be activated when an alarm or exception occurs, including Full Screen...
  • Page 131 ATM Digital Video Recorder User Manual Sends an exception or alarm signal to remote alarm host when an event occurs. The alarm host refers to the PC installed with Remote Client. The alarm signal will be transmitted automatically at detection mode when remote alarm host is configured.
  • Page 132 ATM Digital Video Recorder User Manual Figure 8-19 Set Arming Schedule of Alarm Output 2) Repeat step 1) to set arming schedule of other days of a week. Or click Copy to copy an arming schedule to other days. 3) Click OK to complete the arming schedule setting of alarm output. Step 3 Repeat the above steps to finish settings of other alarm outputs, or click Copy to copy the above settings to them.

  • Page 133: Chapter 9 Smart Atm Settings

    ATM Digital Video Recorder User Manual Chapter 9 Smart ATM Settings For iDS-8104AHQXLI-E4 ATM DVR, you can enable smart ATM function. Four smart ATM modes are supported: panel mode, environment mode, human face mode, and safety cabin mode.  The ATM DVR supports up to 4-ch smart ATM configuration of panel mode, environment mode, human face mode, and safety cabin mode together;...
  • Page 134 ATM Digital Video Recorder User Manual Figure 9-1 Panel Mode Step 4 Configure Smart ATM Capture. 1) Click Smart ATM Capture. 2) Configure the captured picture parameters in panel mode. 3) Click Apply to save the settings. Figure 9-2 Picture Configuration Step 5 Configure Target Overlay.
  • Page 135 ATM Digital Video Recorder User Manual 1) Click Target Overlay. 2) Check Display Target Info. on Alarm Picture or Display Rule Info. on Alarm Picture. Once they are checked, the target or rule information will be overlaid on the captured picture. 3) Click Apply to save the settings.
  • Page 136 ATM Digital Video Recorder User Manual Figure 9-4 Scene Description Step 7 (Optional) Configure the shield region. You can configure shield regions to shield the influence of the configured rules towards the regions. The region easily influenced by light interference can be configured as the shield region to avoid false alarm.
  • Page 137 ATM Digital Video Recorder User Manual 4) Click OK to save the settings. Figure 9-5 Rule Configuration Rules of different types can be enabled together for the panel mode. Step 9 Draw the rule region. 1) Select a rule. 2) Click the buttons to draw the rule region. If you select Human Entrance, click Draw Entrance Region to draw the region.

  • Page 138: Environment Mode

    ATM Digital Video Recorder User Manual Figure 9-6 Alarm Response Actions Configuration Step 11 Click Apply in Smart ATM Configuration interface to save the settings. 9.2 Environment Mode Purpose Environment mode supports the following smart ATM protection rule types: line crossing, region entrance, region exiting, intrusion, loitering, objects removal or unattended baggage, violent motion, tailing, falling down, and sudden change of sound intensity.
  • Page 139 ATM Digital Video Recorder User Manual Figure 9-7 Environment Mode Step 4 Configure Smart ATM Capture. Refer to step 4 of Chapter 9.1 Panel Mode for details. Step 5 Configure Target Overlay. Refer to step 5 of Chapter 9.1 Panel Mode for details. Step 6 (Optional) Configure the shield region.

  • Page 140: Human Face Mode

    ATM Digital Video Recorder User Manual Figure 9-8 Rule Configuration Rules of different types can be enabled together for the environment mode. Step 8 Draw the rule region. Refer to step 9 of Chapter 9.1 Panel Mode for details. Step 9 Configure the alarm response actions. Refer to step 10 of Chapter 9.1 Panel Mode for details. Step 10 Click Apply in Smart ATM Configuration interface to save the settings.
  • Page 141 ATM Digital Video Recorder User Manual Figure 9-9 Human Face Mode Step 4 Configure Smart ATM Capture. Refer to step 4 of Chapter 9.1 Panel Mode for details. Step 5 (Optional) Configure the shield region. Refer to step 7 of Chapter 9.1 Panel Mode for details. Step 6 Select the rule and click to configure the rule.

  • Page 142: Safety Cabin Mode

    ATM Digital Video Recorder User Manual Figure 9-10 Rule Configuration Step 7 Draw the rule region. 1) Click Draw Max. Size to draw the maximum size of the human face. 2) Click Draw Min. Size to draw the minimum size of the human face. The max.
  • Page 143 ATM Digital Video Recorder User Manual Figure 9-11 Safety Cabin Mode Step 4 Configure Smart ATM Capture. Refer to step 4 of Chapter 9.1 Panel Mode for details. Step 5 Configure Target Overlay. Refer to step 5 of Chapter 9.1 Panel Mode for details. Step 6 Configure Scene Description.
  • Page 144 ATM Digital Video Recorder User Manual Figure 9-12 Scene Description Step 7 (Optional) Configure the shield region. Refer to step 7 of Chapter 9.1 Panel Mode for details. Step 8 Select the rule and click to configure the rule. 1) Edit Name. 2) Select Type.
  • Page 145 ATM Digital Video Recorder User Manual Rules of different types can be enabled together for the safety cabin mode. Step 9 Draw the rule region. Refer to step 9 of Chapter 9.1 Panel Mode for details. Step 10 Configure the alarm response actions. Refer to step 10 of Chapter 9.1 Panel Mode for details. Step 11 Click Apply in Smart ATM Configuration interface to save the settings.

  • Page 146: Chapter 10 Network Settings

    ATM Digital Video Recorder User Manual Chapter 10 Network Settings 10.1 Configuring General Settings Purpose Network settings must be properly configured before you operate the device over network. Step 1 Enter the Network Settings interface. Menu > Configuration > Network > General Figure 10-1 Network Settings Interface Step 2 Configure the following parameters: Working Mode, NIC Type, IPv4 Address, IPv4 Gateway, MTU, DNS Server and Main NIC.

  • Page 147: Configuring Advanced Settings

    ATM Digital Video Recorder User Manual  The valid value of MTU is from 500 to 1500.  If the DHCP server is available, you can check the checkbox of Enable DHCP to automatically obtain an IP address and other network settings from that server. ...
  • Page 148 ATM Digital Video Recorder User Manual Step 1 Enter the Network Settings interface. Menu > Configuration > Network Step 2 Select the DDNS tab to enter the DDNS Settings interface. Step 3 Check the Enable DDNS checkbox to enable this feature. Step 4 Select DDNS Type.
  • Page 149 ATM Digital Video Recorder User Manual Figure 10-5 PeanutHull Settings Interface  NO-IP: Enter the account information in the corresponding fields. Refer to the DynDNS settings. 1) Enter Server Address for NO-IP. 2) In the Device Domain Name text field, enter the domain obtained from the NO-IP website (www.no-ip.com).
  • Page 150 ATM Digital Video Recorder User Manual Figure 10-7 HiDDNS Settings Interface  Register the device on the HiDDNS server. 1) Go to the HiDDNS website: www.hik-online.com. Figure 10-8 Login Interface 2) Click to register an account if you do not have one and use the account to log in.
  • Page 151 ATM Digital Video Recorder User Manual Figure 10-9 Register an Account 3) In the Device Management interface, click to register the device. Figure 10-10 Register the Device 4) Input Device Serial No., Device Domain (Device Name) and HTTP Port. And click OK to add the device.

  • Page 152: Configuring Ntp Server

    ATM Digital Video Recorder User Manual Example: http://www.hik-online.com/nvr If you mapped the HTTP port on your router and changed it to port No. except 80, you have to enter http://www.hik-online.com/alias:HTTP port in the address bar to access the device. You can refer to Chapter 12.2.7 Configuring HTTPS Port for the mapped HTTP port No..

  • Page 153: Configuring Nat

    ATM Digital Video Recorder User Manual Figure 10-12 NTP Settings Interface Step 3 Check the Enable NTP checkbox to enable this feature. Step 4 Configure the following NTP settings:  Interval: Time interval between the two synchronizing actions with NTP server. The unit is minute.
  • Page 154 ATM Digital Video Recorder User Manual Figure 10-13 UPnP™ Settings Interface Step 3 Check Enable UPnP checkbox to enable UPnP™. Step 4 Select the Mapping Type as Manual or Auto in the drop-down list. OPTION 1: Auto If you select Auto, the Port Mapping items are read-only, and the external ports are set by the router automatically.

  • Page 155: Configuring More Settings

    ATM Digital Video Recorder User Manual Figure 10-15 External Port Settings Dialog Box 2) Click Apply button to save the settings. 3) You can click Refresh button to get the latest status of the port mapping. Figure 10-16 UPnP™ Settings Finished-Manual 10.2.5 Configuring More Settings Step 1 Enter the Network Settings interface.

  • Page 156: Configuring Https Port

    ATM Digital Video Recorder User Manual range of 224.0.0.0 to 239.255.255.255. It is recommended to use the IP address ranging from 239.252.0.0 to 239.255.255.255. When adding a device to the CMS (Client Management System) software, the multicast address must be the same as the device’s multicast IP. ...
  • Page 157 ATM Digital Video Recorder User Manual Step 2 Input the correct user name and password, and click Login button to log in the device. Step 3 Enter the HTTPS settings interface. Configuration > Remote Configuration > Network Settings > HTTPS Step 4 Create the self-signed certificate or authorized certificate.

  • Page 158: Configuring Email

    ATM Digital Video Recorder User Manual Step 5 There will be the certificate information after you successfully create and install the certificate. Figure 10-20 Installed Certificate Property Step 6 Check the checkbox to enable the HTTPS function. Step 7 Click the Save button to save the settings. 10.2.7 Configuring Email Purpose The system can be configured to send an Email notification to all designated users if an event is...
  • Page 159 ATM Digital Video Recorder User Manual Step 3 Configure the following Email settings: Enable Server Authentication (optional): Check the checkbox to enable the server authentication feature. User Name: The user account of sender’s Email for SMTP server authentication. Password: The password of sender’s Email for SMTP server authentication. SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com).

  • Page 160: Configuring Network Detection

    ATM Digital Video Recorder User Manual 10.3 Configuring Network Detection Purpose You can obtain network connecting status of DVR through the network detection function, including network delay, packet loss, etc. 10.3.1 Checking Network Traffic Purpose You can check the network traffic to obtain real-time information of DVR such as linking status, MTU, sending/receiving rate, etc.

  • Page 161: Exporting Network Packet

    ATM Digital Video Recorder User Manual Figure 10-24 Network Detection Interface Step 3 Select a NIC to test network delay and packet loss. Step 4 Enter the destination address in the text field of Destination Address. Step 5 Click the Test button to start testing network delay and packet loss. 10.3.3 Exporting Network Packet Purpose By connecting the DVR to network, the captured network data packet can be exported to USB-flash...

  • Page 162: Checking Network Status

    ATM Digital Video Recorder User Manual Figure 10-26 Packet Export Attention Up to 1M data can be exported each time. 10.3.4 Checking Network Status Purpose You can also check the network status and quick set the network parameters in this interface. Step 1 Enter the Network Traffic interface.

  • Page 163: Checking Network Statistics

    ATM Digital Video Recorder User Manual Figure 10-29 Network Parameters Configuration 10.3.5 Checking Network Statistics Purpose: You can check the network statistics to obtain the real-time information of the device. Step 1 Enter the Network Statistics interface. Menu > Maintenance> Net Detect Step 2 Click the Network Stat.

  • Page 164: Chapter 11 Atm Settings

    ATM Digital Video Recorder User Manual Chapter 11 ATM Settings 11.1 Network Interception Before you start Connect the device and the ATM (Automatic Teller Machine) to the network properly. Purpose The transaction information of ATM, including transaction card No, transaction amount, transaction behaviour, etc., can be captured by monitoring the data package of the network communication.

  • Page 165: Serial Port Interception

    ATM Digital Video Recorder User Manual Figure 11-2 Network Interception Settings Step 6 Select the protocol for the network interception. 2 types of protocols are selectable: PSBC and Custom. If you select Custom as the protocol, click Setting to customize the protocol for network communication. For details, see Chapter 10.5 Custom Protocol Settings.

  • Page 166: Network Protocol

    ATM Digital Video Recorder User Manual Step 4 Select Serial Port Interception from the drop-down list as the input mode. Step 5 Configure the serial port interception settings. 1) Click Setting to enter the Serial Port Interception Settings interface. 2) Set the baud rate, data bit, stop bit, parity, flow ctrl and usage for the serial port communication.
  • Page 167 Figure 11-6 Network Protocol Settings Step 6 Select the protocol from the drop-down list for the network communication. 2 types of protocols are selectable: HIKVISION and ICBC. Step 7 Click Apply and reboot the device to activate the new settings.

  • Page 168: Serial Port Protocol

    ATM Digital Video Recorder User Manual 11.4 Serial Port Protocol Before you start Connect the device and the ATM (Automatic Teller Machine) via the serial port properly. Purpose The transaction information, including transaction card No, transaction amount, transaction behaviour, etc., will be sent from the ATM to the device. Step 1 Enter the ATM Settings interface.
  • Page 169 Figure 11-8 Serial Port Protocol Settings Step 6 Select the protocol from the drop-down list for the serial port communication. 2 types of protocols are selectable: HIKVISION and ICBC. Step 7 Click Apply and reboot the device to activate the new settings.

  • Page 170: Custom Protocol Settings

    ATM Digital Video Recorder User Manual 11.5 Custom Protocol Settings Purpose When Network Interception or Serial Port Interception is selected as the input mode of the device, you can configure the custom protocols to analyze the data package captured via the network or serial port, thus to get the ATM transaction information.

  • Page 171: Configuring Transaction Information Settings

    ATM Digital Video Recorder User Manual Figure 11-10 Custom Protocol Settings-Data Package Step 2 Select the Data Format and then set the Start Tag for the data package. Step 3 Select the Data Format and then set the End Tag for the data package. Step 4 (Optional) Check the checkbox of Enable Filter, select the Data Format, input the Content and set the Content Position to filter the specified contents.
  • Page 172 ATM Digital Video Recorder User Manual Figure 11-11 Custom Protocol Settings-Transaction Information Step 2 Select the Major Type of transaction information from the drop-down list, including the Card No., Transaction Behaviour, Transaction Amount or Serial No. When the Transaction Behaviour is set as the major type, 8 minor types are selectable: Card In, Card Out, Overlay, Query, Withdrawal, Deposit, Change Password and Transfer.

  • Page 173: Configuring Trigger Channel Settings

    ATM Digital Video Recorder User Manual Figure 11-13 Length Settings Select the Length Type to Variable, set the minimum length and maximum length for the transaction information, and then select data format and set the end character. Or select the Length Type to Fixed, and set the fixed length value. Or select the Length Type to Auto, set the length digits and length position, and then the length of the transaction information will be obtained from the message automatically.

  • Page 174: Configuring Overlay Position Settings

    ATM Digital Video Recorder User Manual Figure 11-14 Custom Protocol Settings-Trigger Channel Step 2 Check the checkboxes to select the analog channels or IP channels for the text overlay of transaction information and command triggered recording. Step 3 Check the check of Enable Time Delay. Step 4 Set the Delay Time value for menu display if there is no Card In or Card Out in the transaction information.
  • Page 175 ATM Digital Video Recorder User Manual Figure 11-15 Custom Protocol Settings-Overlay Position Step 2 If you do not need to overlay the transaction information on the display window, select None as the overlay position; If you need to overlay the transaction information on the display window, select Custom as the overlay position, and then drag the yellow rectangle to the desired position on the display window.

  • Page 176: Chapter 12 Raid

    ATM Digital Video Recorder User Manual Chapter 12 RAID 12.1 Configuring Array Purpose RAID (redundant array of independent disks) is a storage technology that combines multiple disk drive components into a logical unit. A RAID setup stores data over multiple hard disk drives to provide enough redundancy so that data can be recovered if one disk fails.

  • Page 177: Enable Raid

    ATM Digital Video Recorder User Manual Figure 12-1 RAID Working Flow 12.1.1 Enable RAID Purpose Perform the following steps to enable the RAID function, or the disk array cannot be created.  OPTION 1: Enable the RAID function in the Wizard when the device startup, please refer to step 4 of Chapter 2.4.2.

  • Page 178: One-Touch Configuration

    ATM Digital Video Recorder User Manual 12.1.2 One-touch Configuration Purpose Through one-touch configuration, you can quickly create the disk array. By default, the array type to be created is RAID 5. Before you start 1. The RAID function should be enabled, please refer to the Chapter 12.1.1 for details. 2.

  • Page 179: Manually Creating Array

    ATM Digital Video Recorder User Manual If you install 4 HDDs for one-touch configuration, a hot spare disk will be set by default. It is recommended to set hot spare disk for automatically rebuilding the array when the array is abnormal.
  • Page 180 ATM Digital Video Recorder User Manual Figure 12-7 Physical Disk Settings Interface Step 2 Click Creat button to enter the Create Array interface. Figure 12-8 Create Array Interface Step 3 Edit the Array Name; set the RAID Level to RAID 0, RAID 1, RAID 5, or RAID 10; select the Physical Disk that you want to configure array.

  • Page 181: Rebuilding Array

    ATM Digital Video Recorder User Manual Figure 12-9 Error Message Box Step 5 You can click Array tab to view the successfully created array. Figure 12-10 Array Settings Interface 12.2 Rebuilding Array Purpose The working status of array includes Functional, Degraded and Offline. By viewing the array status, you can take immediate and proper maintenance for the disks so as to ensure the high security and reliability of the data stored in the disk array.

  • Page 182: Automatically Rebuilding Array

    ATM Digital Video Recorder User Manual Figure 12-11 Physical Disk Settings Interface Step 2 Select a disk and click to set it as the hot spare disk. Only global hot spare mode is supported. 12.2.1 Automatically Rebuilding Array Purpose When the virtual disk is in Degraded status, the device can start rebuilding the array automatically with the hot spare disk to ensure the high security and reliability of the data.

  • Page 183: Deleting Array

    ATM Digital Video Recorder User Manual Step 1 Enter the Array Settings interface. The disk 3 is lost. Menu > HDD > RAID > Array Figure 12-13 Array Settings Interface Step 2 Click Array tab to return to the Array Settings interface and click to configure the array rebuild.

  • Page 184: Checking And Editing Firmware

    ATM Digital Video Recorder User Manual Figure 12-15 Array Settings Interface Step 2 Select an array and click to delete the array. Figure 12-16 Confirm Array Deletion Step 3 In the pop-up message box, click Yes button to confirm the array deletion. Deleting array will cause to delete all the data in the array.

  • Page 185: Chapter 13 Hdd Management

    ATM Digital Video Recorder User Manual Chapter 13 HDD Management 13.1 Initializing HDDs Purpose A newly installed hard disk drive (HDD) must be initialized before it can be used with your DVR. Step 1 Enter the HDD Information interface. Menu > HDD > General Figure 13-1 HDD Information Interface You can view the Total Capacity, Free Space and Remaining Recording Time of the HDD.

  • Page 186: Managing Network Hdd

    ATM Digital Video Recorder User Manual Figure 13-3 Start Initialization Step 5 After the HDD has been initialized, the status of the HDD will change from Uninitialized to Normal. Figure 13-4 HDD Status Changes to Normal Initializing the HDD will erase all data on it. The HDDs which are free of working for a long time can be enabled to sleep, thus to decrease the power consumption of the device and extend the life of the HDDs.
  • Page 187 ATM Digital Video Recorder User Manual Figure 13-6 HDD Information Interface Step 2 Click the Add button to enter the Add NetHDD interface, as shown in Figure 13-7. Figure 13-7 HDD Information Interface Step 3 Add the allocated NetHDD. Step 4 Select the type to NAS or IP SAN. Step 5 Configure the NAS or IP SAN settings.
  • Page 188 ATM Digital Video Recorder User Manual Figure 13-8 Add NAS Disk  Add IP SAN: 1) Enter the NetHDD IP address in the text field. 2) Click the Search button to the available IP SAN disks. 3) Select the IP SAN disk from the list shown below. 4) Click the OK button to add the selected IP SAN disk.

  • Page 189: Managing Hdd Group

    ATM Digital Video Recorder User Manual Figure 13-10 Initialize Added NetHDD 13.3 Managing HDD Group 13.3.1 Setting HDD Groups Purpose Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD group through HDD settings. Step 1 Enter the Storage Mode interface.

  • Page 190: Setting Hdd Property

    ATM Digital Video Recorder User Manual Figure 13-13 Local HDD Settings Interface Step 7 Select the Group number for the current HDD. The default group No. for each HDD is 1. Step 8 Click the OK button to confirm the settings. Figure 13-14 Confirm HDD Group Settings Step 9 In the pop-up Attention box, click the Yes button to finish the settings.

  • Page 191: Configuring Quota Mode

    ATM Digital Video Recorder User Manual Figure 13-15 Set HDD Property Step 3 Set the HDD property to R/W, Read-only or Redundancy. Step 4 Click the OK button to save the settings and exit the interface. Step 5 In the HDD Information menu, the HDD property will be displayed in the list. At least 2 hard disks must be added on your DVR when you want to set a HDD to Redundancy, and there is one HDD with R/W property.

  • Page 192: Checking Hdd Status

    ATM Digital Video Recorder User Manual Figure 13-16 Storage Mode Settings Interface Step 4 Select a camera for which you want to configure quota. Step 5 Enter the storage capacity in the text field of Max. Record Capacity (GB). Step 6 You can copy the quota settings of the current camera to other cameras if required. Click the Copy button to enter the Copy Camera interface, as shown in Figure 13-17.

  • Page 193: Checking S.m.a.r.t Information

    ATM Digital Video Recorder User Manual You may check the status of the installed HDDs on DVR so as to take immediate check and maintenance in case of HDD failure. Checking HDD Status in HDD Information Interface Step 1 Enter the HDD Information interface. Menu >...

  • Page 194: Detecting Bad Sector

    ATM Digital Video Recorder User Manual If you want to use the HDD even when the S.M.A.R.T. checking is failed, you can check the checkbox before the Continue to use this disk when self-evaluation is failed item. Figure 13-20 S.M.A.R.T Settings Interface 13.7 Detecting Bad Sector Purpose You can detect the bad sector of the HDD to check the status of the HDD.

  • Page 195: Configuring Hdd Error Alarms

    ATM Digital Video Recorder User Manual Step 4 You can click the Pause button to pause the detection and click the Resume button to resume the detection. Step 5 If there is error information about the HDD, you can click the Error Info button to view the information.

  • Page 196: Chapter 14 Camera Settings

    ATM Digital Video Recorder User Manual Chapter 14 Camera Settings 14.1 Configuring OSD Settings Purpose You can configure the OSD (On-Screen Display) settings for the camera, including date/time, camera name, etc. Step 1 Enter the OSD Configuration interface. Menu > Camera > OSD Step 2 Select the camera to configure OSD settings.

  • Page 197: Configuring Privacy Mask

    ATM Digital Video Recorder User Manual Figure 14-2 Copy Settings to Other Cameras 2) Select the camera (s) to be configured with the same OSD settings. You can also check the checkbox of Analog to select all cameras. 3) Click the OK button to finish the Copy settings and back to the OSD Configuration interface.

  • Page 198: Configuring Video Parameters

    ATM Digital Video Recorder User Manual Figure 14-3 Set Privacy Mask Area Step 6 You can click the Copy button to copy the privacy mask settings of the current camera to other cameras. Please refer to step 7 of Chapter 14.1 Configuring OSD Settings. Step 7 Click Apply to save the settings.

  • Page 199: Configuring Camera Parameters Settings

    ATM Digital Video Recorder User Manual Figure 14-5 Image Settings Interface (IP Camera) Step 3 Select the camera to set image parameters. Step 4 Two periods for different image settings are provided, select the period name in the drop-down list. The time periods cannot be overlapped with each other.
  • Page 200 ATM Digital Video Recorder User Manual Figure 14-6 Camera Parameters Settings Step 3 Select the Camera from the drop-down list. Step 4 (Optional) Adjust the parameters including Day to Night Sensitivity, Night to Day Sensitivity and IR Light Brightness for the analog cameras. You can also click Default to set the parameters to the default settings.

  • Page 201: Chapter 15 Dvr Management And Maintenance

    ATM Digital Video Recorder User Manual Chapter 15 DVR Management and Maintenance 15.1 Viewing System Information Step 1 Enter the System Information interface. Menu > Maintenance > System Info Step 2 You can click the Device Info, Camera, Record, Alarm, Network and HDD tabs to view the system information of the device.
  • Page 202 ATM Digital Video Recorder User Manual Figure 15-2 Log Search Interface Step 2 Set the log search conditions to refine your search, including the Start Time, End Time, Major Type and Minor Type. Step 3 Click the Search button to start search log files. Step 4 The matched log files will be displayed on the list shown below.
  • Page 203 ATM Digital Video Recorder User Manual Figure 15-4 Log Information Interface Step 6 If you want to export the log files, click the Export button to enter the Export menu, as shown in Figure 15-5. Figure 15-5 Export Log Files Step 7 Select the backup device from the drop-down list of Device Name.

  • Page 204: Importing/Exporting Ip Camera Info

    ATM Digital Video Recorder User Manual 15.3 Importing/Exporting IP Camera Info Purpose The information of added IP camera can be generated into an excel file and exported to the local device for backup, including the IP address, manage port, password of admin, etc. And the exported file can be edited on your PC, like adding or deleting the content, and copy the setting to other devices by importing the excel file to it.

  • Page 205: Upgrading System

    ATM Digital Video Recorder User Manual Step 2 Click the Export button to export configuration files to the selected local backup device. Step 3 To import a configuration file, select the file from the selected backup device and click the Import button.

  • Page 206: Upgrading Camera

    ATM Digital Video Recorder User Manual Figure 15-8 FTP Upgrade Interface Step 3 Enter the FTP Server Address in the text field. Step 4 Click the Upgrade button to start upgrading. Step 5 After the upgrading is completed, reboot the DVR to activate the new firmware. 15.6 Upgrading Camera Purpose You can upgrade multiple connected analog cameras supporting HDTVI signal simultaneously with...
  • Page 207 ATM Digital Video Recorder User Manual Figure 15-10 Restore Defaults Step 2 Select the restoring type from the following three options. Restore Defaults: Restore all parameters, except the network (including IP address, subnet mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the factory default settings.

  • Page 208: Chapter 16 Others

    ATM Digital Video Recorder User Manual Chapter 16 Others 16.1 Configuring General Settings Purpose You can configure the output resolution, system time, mouse pointer speed, etc. Step 1 Enter the General Settings interface. Menu > Configuration > General Step 2 Select the General tab. Figure 16-1 General Settings Interface Step 3 Configure the following settings: ...

  • Page 209: Configuring Rs-232 Serial Port

    ATM Digital Video Recorder User Manual  HDMI and VGA share simultaneous output. The LCD does not share simultaneous output with HDMI/VGA output. The LCD resolution stays as 1024 × 600.  The default VGA/HDMI resolution is 1024 × 768/60Hz. If you connect the external display to the DVR via the HDMI or VGA interface, set the VGA/HDMI resolution between 1280 ×...

  • Page 210: Configuring Dst Settings

    ATM Digital Video Recorder User Manual Menu >Configuration> RS-232 Figure 16-3 RS-232 Settings Interface Step 2 Configure RS-232 parameters, including baud rate, data bit, stop bit, parity, flow control and usage. Step 3 Click Apply to save the settings. 16.3 Configuring DST Settings Step 1 Enter the General Settings interface.

  • Page 211: Managing User Accounts

    ATM Digital Video Recorder User Manual Figure 16-5 More Settings Interface Step 3 Configure the following settings:  Device Name: Edit the name of DVR.  Device No.: Edit the serial number of DVR. The Device No. can be set in the range of 1 to 255, and the default No.
  • Page 212 ATM Digital Video Recorder User Manual Figure 16-6 User Management Interface Step 2 Click Add to enter the Add User interface. Figure 16-7 Add User Menu Step 3 Enter the information for new user, including User Name, Password, Confirm, Level and User’s MAC Address.
  • Page 213 ATM Digital Video Recorder User Manual  Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only has the local/remote playback in the Camera Configuration by default. User’s MAC Address: The MAC address of the remote PC which logs onto the DVR. If it is configured and enabled, it only allows the remote user with this MAC address to access the DVR.
  • Page 214 ATM Digital Video Recorder User Manual  Local Camera Management: Enabling and disabling analog camera (s). Adding, deleting and editing of network camera (s). This function is supported by HDVR series.  Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD property), upgrading system firmware.

  • Page 215: Deleting A User

    ATM Digital Video Recorder User Manual 3) Click OK to save the settings and exit. 16.5.2 Deleting a User Step 1 Enter the User Management interface. Menu >Configuration>User Step 2 Select the user to be deleted from the list, as shown in Figure 16-10. Figure 16-10 User List Step 3 Click to delete the selected user account.
  • Page 216 ATM Digital Video Recorder User Manual Figure 16-11 Edit User Interface Step 4 Edit the corresponding parameters.  Operator and Guest You can edit the user information, including user name, password, permission level and MAC address. Check the checkbox of Change Password if you want to change the password, and input the new password in the text field of Password and Confirm.
  • Page 217 ATM Digital Video Recorder User Manual 2) Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the pattern is done. 3) Confirm the pattern again with the mouse. Please refer to Chapter 2.3.1 Configuring the Unlock Pattern for detailed instructions. Figure 16-12 Set Unlock Patter for Admin User Step 6 (Optional) Click icon after Draw Unlock Pattern to modify the pattern.

  • Page 218: Chapter 17 Appendix

    ATM Digital Video Recorder User Manual Chapter 17 Appendix 17.1 Glossary • Dual-Stream: Dual-stream is a technology used to record high resolution video locally while transmitting a lower resolution stream over the network. The two streams are generated by the DVR, with the main stream having a maximum resolution of 1080P and the sub-stream having a maximum resolution of CIF.

  • Page 219: Troubleshooting

    ATM Digital Video Recorder User Manual • PTZ: Acronym for Pan, Tilt, Zoom. PTZ cameras are motor driven systems that allow the camera to pan left and right, tilt up and down and zoom in and out. • USB: Acronym for Universal Serial Bus. USB is a plug-and-play serial bus standard to interface devices to a host computer.
  • Page 220 ATM Digital Video Recorder User Manual Step 2 Verify the HDD is initialized. 1) Select “Menu>HDD>General”. 2) If the status of the HDD is “Uninitialized”, please check the checkbox of corresponding HDD and click the “Init” button. Step 3 Verify the HDD is detected or is in good condition. 1) Select “Menu>HDD>General”.
  • Page 221 ATM Digital Video Recorder User Manual If not, please contact the engineer from our company to do the further process.  The image gets stuck when DVR is playing back by single or multi-channel cameras. Possible Reasons: — The frame rate is not the real-time frame rate. —...

  • Page 222: Summary Of Chnages

    ATM Digital Video Recorder User Manual 17.3 Summary of Chnages 17.3.1 Version 3.4.83 Upgraded:  iDS-8104AHQXLI-E4 supports up to 4-ch smart ATM configuration of panel mode, environment mode, human face mode, and safety cabin mode together; up to 2-ch human face mode, up to 2-ch safety cabin, or up to 1-ch human face mode and 1-ch safety cabin mode together.
  • Page 223 ATM Digital Video Recorder User Manual  Clear-text password available.  GUID file can be exported for password resetting.  Multiple connected analog cameras supporting HDTVI signal can be upgraded simultaneously via DVR.  Configurable output bandwidth limit.  If DHCP is enabled, you can enable DNS DHCP or disable it and configure the Preferred DNS Server and Alternate DNS Server.
  • Page 224 ATM Digital Video Recorder User Manual...

This manual is also suitable for:

Ds-8104ahqli-e4Ids-8104ahqxli-e4

Table of Contents