Step 4 Configure Smart ATM Capture. Refer to step 4 of Chapter 9.1 Panel Mode for details.
Step 5 Configure Target Overlay. Refer to step 5 of Chapter 9.1 Panel Mode for details.
Step 6 Configure Scene Description.
1) Click Scene Description.
2) Configure the scene parameters in safety cabin mode.
Mounting Height: The mounting height of the camera.
Safety Cabin Door Position: The position of the safety cabin door on the covered
image of the camera. Above, Below, Left, Right are selectable.
Safety Cabin Number: The number of the safety cabin.
3) Click Apply to save the settings.
ATM Digital Video Recorder User Manual
Figure 9-11 Safety Cabin Mode
142