HIKVISION DS-8104AHQI-E4 User Manual page 180

Step 2 Click Creat button to enter the Create Array interface.
Step 3 Edit the Array Name; set the RAID Level to RAID 0, RAID 1, RAID 5, or RAID 10; select the
Physical Disk that you want to configure array.
 If you choose RAID 0, at least 2 HDDs must be installed.
 If you choose RAID 1, 2 HDDs need to be configured for RAID 1.
 If you choose RAID 5, at least 3 HDDs must be installed.
 If you choose RAID 10, the number of HDDs installed should be even in the range of 4 to 16.
Step 4 Click OK button to create array.
If the number of HDDs you select is not compatible with the requirement of the RAID level, the
error message box will pop up.
ATM Digital Video Recorder User Manual
Figure 12-7 Physical Disk Settings Interface
Figure 12-8 Create Array Interface
179