HIKVISION DS-8104AHQI-E4 User Manual page 200

Step 3 Select the Camera from the drop-down list.
Step 4 (Optional) Adjust the parameters including Day to Night Sensitivity, Night to Day
Sensitivity and IR Light Brightness for the analog cameras. You can also click Default to set
the parameters to the default settings.
Step 5 (Optional) Click Copy to copy the parameters of the current camera to other analog
cameras.
Step 6 Click Apply to save the settings.
 The camera parameters settings is only applicable for ananlog cameras.
 The Day to Night Sensitivity, Night to Day Sensitivity and IR Light Brightness functions must
be supported by the connected analog camera. You cannot set the parameters if the
connected analog camera does not support them or there is no video signal.
 The parameters are saved to the connected analog camera and are not saved to the DVR.
 The default value of Day to Night Sensitivity, Night to Day Sensitivity and IR Light Brightness
is 5. The effective value ranges from 1 to 9.
 If you exit from the interface and enter it again, the parameters displayed are those you
have set the last time.
 The DVR connects to the analog camera via coaxitron and there is no response mechanism.
Even if the coaxitron is abnormal, the parameters are still displayed to be set successfully.
ATM Digital Video Recorder User Manual
Figure 14-6 Camera Parameters Settings
199