HIKVISION DS-8104AHQI-E4 User Manual page 213


Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and
only has the local/remote playback in the Camera Configuration by default.
User's MAC Address: The MAC address of the remote PC which logs onto the DVR. If it is
configured and enabled, it only allows the remote user with this MAC address to access the
DVR.
Step 4 Click the OK button to save the settings and go back to the User Management interface.
The added new user will be displayed on the list, as shown in Figure 16-8.
Step 5 You can assign permissions for the added user.
1) Select the user from the list and then click
as shown in Figure 16-9.
2) Set the operating permission of Local Configuration, Remote Configuration and Camera
Configuration for the user.
Local Configuration

Local Log Search: Searching and viewing logs and system information of device.

Local Parameters Settings: Configuring parameters, restoring factory default
parameters and importing/exporting configuration files.
ATM Digital Video Recorder User Manual
Figure 16-8 Added User Listed in User Management Interface
Figure 16-9 User Permission Settings Interface
to enter the Permission Settings interface,
212