One-Touch Configuration - HIKVISION DS-8104AHQI-E4 User Manual

12.1.2 One-touch Configuration

Purpose
Through one-touch configuration, you can quickly create the disk array. By default, the array type
to be created is RAID 5.
Before you start
1. The RAID function should be enabled, please refer to the Chapter 12.1.1 for details.
2. As the default array type is RAID 5, please install at least 3 HDDs in you device.
Step 1 Enter the RAID configuration interface.
Menu > HDD > RAID
Step 2 Check the checkbox of corresponding HDD No. to select it.
Step 3 Click the One-touch Config button to enter the One-touch Array Configuration interface.
Step 4 Edit the array name in the Array Name text filed and click OK button to start configuring
array.
ATM Digital Video Recorder User Manual
Figure 12-3 Physical Disk Interface
Figure 12-4 One-touch Array Configuration
177