5) Select the channels which you want the motion detection event to trigger recording.
6) Click Apply to save the settings.
7) Click OK to return to the upper level menu.
8) Click Apply in the Motion Detection interface to save the settings. Exit from the Motion
Detection interface.
Step 3 Configure the schedule.
Please refer to the step 4 of Chapter 5.2 Configuring Recording and Capture Schedule
you need to select Motion as the record type.
5.4 Configuring Alarm Triggered Recording and Capture
Purpose
Follow the procedure to configure alarm triggered recording or capture.
Step 1 Enter the Alarm Setting interface.
Menu > Configuration > Alarm
ATM Digital Video Recorder User Manual
Figure 5-16 Motion Detection Settings
79
while
,