Table of Contents
Advertisement
Sends an exception or alarm signal to remote alarm host when an event occurs. The alarm host
refers to the PC installed with Remote Client.
The alarm signal will be transmitted automatically at detection mode when remote alarm host is
configured. Please refer to Chapter 12.2.6 Configuring More Settings for details of alarm host
configuration.
Send Email
Send an email with alarm information to a user or users when an alarm is detected.
Please refer to Chapter 12.2.8 Configuring Email for details of Email configuration.
Trigger Alarm Output
Trigger an alarm output when an alarm is triggered.
Step 1 Enter Alarm Output interface.
Menu> Configuration> Alarm> Alarm Output
Select an alarm output and set alarm name and dwell time.
If Manually Clear is selected in the drop-down list of Dwell Time, you can clear it only by going to
Menu> Manual> Alarm.
Step 2 Click
to set the arming schedule of alarm output.
1) Select one day of a week and up to 8 time periods can be set within each day.
Time periods shall not be repeated or overlapped.
ATM Digital Video Recorder User Manual
Figure 8-18 Alarm Output Settings Interface
130
Advertisement
Table of Contents
