Table of Contents
Advertisement
For detailed information of signal input, you can refer to Chapter 2.9 Configuring Signal Input
Channel for reference.
2.4.2 Using the Wizard for Basic Configuration
Purpose
By default, the Setup Wizard starts once the device has loaded. You can follow it to complete the
basic configuration.
Selecting the language:
Step 1 Select the language from the drop-down list.
Step 2 Click Apply button.
Operating the Setup Wizard:
Step 1 The Start Wizard can walk you through some important settings of the device. If you don't
want to use the Start Wizard at that moment, click Exit. You can also choose to use the
Start Wizard next time by leaving the "Start wizard when device starts?" checkbox
checked.
ATM Digital Video Recorder User Manual
Figure 2-15 Configure Signal Input Type
Figure 2-16 Language Configuration
32
Advertisement
Table of Contents
