Adjusting Live View Settings - HIKVISION DS-8104AHQI-E4 User Manual

Step 3 Check the checkbox of Enable Channel-Zero Encoding.
Step 4 Configure the Frame Rate, Max. Bitrate Mode and Max. Bitrate.
Step 5 Click Apply to activate the settings.
After you set the channel-zero encoding, you can get a view of all the channels in the
remote client or web browser in only one screen.

3.4 Adjusting Live View Settings

Purpose
Live view settings can be customized according to different needs. You can configure the output
interface, dwell time for screen to be shown, mute or turning on the audio, the screen number for
each channel, etc.
Step 1 Enter the Live View Settings interface.
Menu > Configuration > Live View > General
The settings available in this menu include:

Video Output Interface: Selects the output to configure the settings.
For DS-8104AHQI-E4, you can select VGA/HDMI, and Main CVBS for video output interface.
For DS-8104AHQLI-E4 and iDS-8104AHQXLI-E4, you can select VGA/HDMI, LCD, and Main
CVBS for video output interface.

Live View Mode: Selects the display mode to be used for Live View.

Dwell Time: The time in seconds to dwell between switching of channels when enabling
auto-switch in live view.
ATM Digital Video Recorder User Manual
Figure 3-7 Live View-Channel-Zero Encoding
Figure 3-8 Live View-General
54