4) To arrange other schedule, leave the All Day checkbox blank and set the Start/End time.
Up to 8 periods can be configured for each day. And the time periods cannot be overlapped
with each other.
To enable Event, Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm)
triggered recording, you must configure the motion detection settings, or alarm input
settings as well. For detailed information, refer to Chapter 8.1, and Chapter 8.7.
To enable smart ATM triggered recording, you must configure the smart ATM settings. Refer
to Chapter 9 Smart ATM Settings.
5) Repeat the above steps 1)-4) to schedule recording for other days in the week. If the
schedule can also be set to other days, click Copy.
ATM Digital Video Recorder User Manual
Figure 5-9 Edit Schedule- All Day
Figure 5-10 Edit Schedule- Set Time Period
75