Table of Contents
Advertisement
Step 2 Select a channel you want to detect video tampering.
Step 3 Check the checkbox of Enable Video Tampering Detection.
Step 4 Drag the sensitivity bar to set a proper sensitivity level.
Step 5 Click
to set handling method of video tampering.
1) Click Arming Schedule tab to set the arming schedule of response action.
Select one day of a week and up to eight time periods can be set within each day. Or you
can click Copy to copy the time period settings to other day(s).
Time periods shall not be repeated or overlapped.
2) Select Linkage Action tab to set alarm response actions of video tampering alarm (Refer to
Chapter 8.7 Setting Alarm Response Actions).
3) Click OK to complete the video tampering settings of the channel.
ATM Digital Video Recorder User Manual
Figure 8-11 Video Tampering Interface
Figure 8-12 Set Arming Schedule of Video Tampering
125
Advertisement
Table of Contents
