Table of Contents
Advertisement
2) Select the camera (s) to be configured with the same OSD settings. You can also check the
checkbox of Analog to select all cameras.
3) Click the OK button to finish the Copy settings and back to the OSD Configuration
interface.
Step 8 Click Apply to save the settings.
14.2 Configuring Privacy Mask
Purpose
You are allowed to configure the four-sided privacy mask zones that cannot be viewed or recorded
by the operator.
Step 1 Enter the Privacy Mask Settings interface.
Menu > Camera > Privacy Mask
Step 2 Select the camera to set privacy mask.
Step 3 Check the checkbox of Enable Privacy Mask to enable this feature.
Step 4 Use the mouse to draw a zone on the window. The zones will be marked with different
frame colors.
Up to 4 privacy mask zones can be configured, and the size of each area can be adjusted.
Step 5 The configured privacy mask zones on the window can be cleared by clicking the
corresponding Clear Zone1-4 icons on the right side of the window, or click Clear All to
clear all zones.
ATM Digital Video Recorder User Manual
Figure 14-2 Copy Settings to Other Cameras
196
Advertisement
Table of Contents
