Default Settings - National Instruments MXI-2 Series Getting Started

Default Settings

PCI-MXI-2/PCI-MXI-2 Universal/PXI-8320
Hardware Settings
© National Instruments Corporation
This section summarizes the hardware and software default settings for the
hardware and software in your kit. For more information about a particular
setting, or to try a different configuration, refer to the appropriate hardware
or software chapters in this documentation set. Refer to the MXI-2
Configuration Reference Manual for your hardware reference and the
MAX help for your software reference.
This section summarizes the hardware and software default settings for the
PCI-MXI-2, PCI-MXI-2 Universal, and PXI-8320.
Table A-1. PCI-MXI-2 Hardware Default Settings
Hardware Component
U17 Switch 1 (FOV)
U17 Switch 2 (TST)
U17 Switch 3 (POS)
U17 Switch 4 (CT)
DRAM SIMM installed
OFF: PCI-MXI-2 boots off the
user-configured half of the EEPROM
OFF: Factory configuration of the
EEPROM is protected
OFF: Do not alter this setting
ON: Do not alter this setting
Per customer order
A-1 PCI-Based MXI-2 Interface for Windows
A
Default Setting