Configuration
Change/View Communication Port Settings
© National Instruments Corporation
This chapter contains instructions to help you view or change the
communication port settings.
The serial configuration utility is fully integrated with the Windows NT
Control Panel. You can use it to examine or modify the configuration of the
serial port.
Follow these steps to configure the serial port.
Select Start»Settings»Control Panel and double-click on the niports
1.
icon. A list of National Instruments ports appears, as shown in
Figure 3-1.
Figure 3-1. niports Configuration Utility
2.
Select the port you are interested in.
3.
Click on the Settings button to view or configure the port settings.
Refer to the next section,
General Port
Settings, for more information.
3-1
3
PCMCIA Serial for Windows NT