National Instruments MXI-2 Series Getting Started page 37

Chapter A Default Settings — VXI/VME-MXI-2
VXI/VME-MXI-2
Hardware Settings
PCI-Based MXI-2 Interface for Windows
Table A-6. MXI-2 Bus Tab Default Settings (Continued)
Editor Field
A24/A32 write posting
VXImove uses Synchronous
MXI
MXI transfer limit
MXI CLK10 signal
Table A-7. PCI Tab Default Settings
Editor Field
Low-level register access API
support
User window size
Expansion ROM
This section summarizes the hardware and software default settings for the
VXI-MXI-2, VXI-MXI-2/B, and VME-MXI-2.
Table A-8. VXI-MXI-2 Hardware Default Settings
Hardware Component
Logical address (U43)
VXIbus Slot 0/Non-Slot 0 (W2)
VXIbus local bus (S8, S9)
VXIbus CLK10 routing (W3)
Disabled
Enabled
Unlimited
Receive
Enabled
64 KB
Enabled
1
Automatic detection
Both OFF: single VXI-MXI-2
From onboard oscillator
A-4
Default Setting
Default Setting
Default Setting
ni.com