Appendix B Default Settings; Table B-1. Vxi-1394 Hardware Default Settings - National Instruments VXI-1394 Getting Started

Default Settings
Note There are no hardware settings on the PCI-1394 board.
Hardware Settings
© National Instruments Corporation
This appendix summarizes the default settings for the hardware and
software in the VXI-1394 kit. If you need more information about a
particular setting, or if you want to try a different configuration, please refer
to Appendix C, Advanced Hardware Configuration
hardware reference and to the T&M Explorer online help for your software
reference.

Table B-1. VXI-1394 Hardware Default Settings

Hardware Component
W1—VXIbus Slot 0/Non-Slot 0
S6—VXIbus CLK10 source
S5—External trigger termination
S3—SMB CLK10 direction
S2—SMB CLK10 termination
S4—Polarity of external SMB
CLK10
S7—Configuration EEPROM
DRAM SIMMs installed
Automatic detection
From onboard oscillator
OFF: unterminated
IN: receive CLK10 signal
OFF: ignored
Inverted
Do not load from factory setting
Per customer order
B-1 VXI-1394 Interface for Windows NT/98
B
Settings, for your
Default Setting