Appendix A Default Settings - National Instruments MXI Getting Started

Default Settings
PCI-MXI-2/PXI-8320
Hardware Settings
© National Instruments Corporation
This section summarizes the hardware and software default settings for the
hardware and software in your kit. If you need more information about a
particular setting, or if you want to try a different configuration, please refer
to the appropriate hardware or software chapters in this documentation set.
Use the MXI-2 Configuration Reference Manual for your hardware
reference and the MAX online help for your software reference.
This section summarizes the hardware and software default settings for the
PCI-MXI-2 and PXI-8320.
Table A-1. PCI-MXI-2 Hardware Default Settings
Hardware Component
U17 Switch 1 (FOV)
U17 Switch 2 (TST)
U17 Switch 3 (POS)
U17 Switch 4 (CT)
DRAM SIMM installed
OFF: PCI-MXI-2 boots off the
user-configured half of the EEPROM
OFF: Factory configuration of the
EEPROM is protected
OFF: Do not alter this setting
ON: Do not alter this setting
Per customer order
A-1 PCI-Based MXI-2 Interfaces for Windows 2000/NT/Me/98
A
Default Setting