National Instruments MXI-2 Series Getting Started page 54

Glossary
DMA
DRAM
driver window
DTB
dynamic configuration
dynamically configured
device
E
ECL
EEPROM
embedded controller
expansion ROM
external controller
F
fair requester
PCI-Based MXI-2 Interface for Windows
Direct Memory Access; a method by which data is transferred between
devices and internal memory without intervention of the central
processing unit
Dynamic RAM (Random Access Memory); storage that the computer must
refresh at frequent intervals
A region of PCI address space that is decoded by the PCI-MXI-2,
PCI-MXI-2 Universal, or PXI-8320 for use by the NI-VXI software
See Data Transfer Bus.
A method of automatically assigning logical addresses to VXIbus devices
at system startup or other configuration times
A device that has its logical address assigned by the Resource Manager.
A VXI device initially responds at Logical Address 255 when its MODID
line is asserted. A MXIbus device responds at Logical Address 255 during
a priority select cycle. The Resource Manager subsequently assigns it a new
logical address, which the device responds to until powered down.
Emitter-Coupled Logic
Electronically Erasable Programmable Read Only Memory
An intelligent CPU (controller) interface plugged directly into the VXI
backplane, giving it direct access to the VXIbus. It must have all of its
required VXI interface capabilities built in.
An onboard EEPROM that may contain device-specific initialization and
system boot functionality
In this configuration, a plug-in interface board in a computer is connected
to the VXI mainframe via one or more VXIbus extended controllers. The
computer then exerts overall control over VXIbus system operations.
A MXIbus master that will not arbitrate for the MXIbus after releasing it
until it detects the bus request signal inactive. This ensures that all
requesting devices will be granted use of the bus.
G-4 ni.com