National Instruments MXI-2 Series Getting Started page 59

SYSRESET
System RAM
T
trigger
TTL
U
user window
V
VIC
VISA
VISAIC
VME
© National Instruments Corporation
A VMEbus signal that is used by a device to indicate a system reset or
power-up condition
RAM installed on your personal computer and used by the operating
system, as contrasted with onboard RAM, which is installed on the MXI-2
board
Either TTL or ECL lines used for intermodule timing
Transistor-Transistor Logic
A region of PCI address space reserved by the PCI-MXI-2, PCI-MXI-2
Universal, or PXI-8320 for use via the NI-VXI low-level function calls.
uses this address space to allocate regions for use by
MapVXIAddress()
the and
VXIpeek() VXIpoke()
VXI Interactive Control Program, a part of the NI-VXI bus interface
software package. Used to program VXI devices, and develop and debug
VXI application programs.
Virtual Instrument Software Architecture. This is the general name given to
VISA and its associated architecture. The architecture consists of two main
VISA components: the VISA Resource Manager and the VISA Instrument
Control Resources.
VISA Interactive Control Program, a part of the NI-VISA software. Used
to program devices, and develop and debug application programs.
Versa Module Eurocard or IEEE 1014
macros.
G-9 PCI-Based MXI-2 Interface for Windows
Glossary