National Instruments MXI-2 Series Getting Started page 35

Chapter A Default Settings — PCI-MXI-2/PCI-MXI-2 Universal/PXI-8320
MAX Settings
PCI-Based MXI-2 Interface for Windows
Table A-2. PCI-MXI-2 Universal Hardware Default Settings
Hardware Component
SW1 Switch 1 (FOV)
SW1 Switch 2 (TST)
SW1 Switch 3 (POS)
SW1 Switch 4 (CT)
DRAM SODIMM installed
Table A-3. PXI-8320 Hardware Default Settings
Hardware Component
U6 Switch 1 (FOV)
U6 Switch 2 (TST)
U6 Switch 3 (POS)
U6 Switch 4 (CT)
DRAM SODIMM installed
Table A-4. Device Tab Default Settings
Editor Field
Logical address
Device class
A-2
Default Setting
OFF: PCI-MXI-2 Universal boots off
the user-configured half of the
EEPROM
OFF: Factory configuration of the
EEPROM is protected
OFF: Do not alter this setting
ON: Do not alter this setting
Per customer order
Default Setting
OFF: PXI-8320 boots off the
user-configured half of the EEPROM
OFF: Factory configuration of the
EEPROM is protected
OFF: Do not alter this setting
ON: Do not alter this setting
Per customer order
Default Setting
0
Message-based
ni.com