VPC i2 MICRO iCON User Manual page 3

i2 MICRO iCON USER'S MANUAL: SECTION 1
Figure A points out distinguishing features of the i2 Micro iCon ITA so that the top and
bottom can be identified. Features to look for are the numeric keying receptacle on
the top side and the alpha keying receptacle on the bottom. By holding the i2 Micro
iCon ITA, the top can be determined by holding it so the letters and numbers are
readable.
The front and rear of the i2 Micro iCon ITA are easily distinguished as shown in Figure B.
The front has a protruding guide plate with locking tabs and the rear has the knob.
The front side mates with the i2 Micro iCon receiver. The front has a polarizing feature
which prevents the ITA and receiver from being engaged in the incorrect orientation.
Wires exit the i2 Micro iCon ITA through the 30° cable exit.
Top
Numeric Keying
Receptacle
Alpha Keying
Receptacle
Bottom
Figure A. i2 Micro iCon ITA front view.
1-2
i2 MICRO iCON ITA PART IDENTIFICATION
PART # 410 130 XXX
Polarizing
Feature
Front
Mating
Locking
Side
Tabs
Figure B. i2 Micro iCon ITA side view.
For the most current information available, visit www.vpc.com
VIRGINIA PANEL CORPORATION
Rear
Wiring
Side
30° Cable Exit
Figure C. Pin location
layout.
4/23/15