VPC i2 MICRO iCON User Manual page 2

i2 MICRO iCON USER'S MANUAL: SECTION 1
Figure A points out distinguishing features of the i2 Micro iCon receiver so that the top
and bottom can be identified. Features to look for are the numeric keying receptacle
on the top side and the alpha keying receptacle on the bottom. By holding the
i2 Micro iCon receiver, the top can be determined by holding it so the letters and
numbers are readable.
The front and rear of the i2 Micro iCon receiver are shown in Figure B. The front has
a polarizing feature which prevents the ITA and receiver from being engaged in the
incorrect orientation. The front of the i2 Micro iCon receiver can be identified as the
side with the latching feature. The i2 Micro iCon receiver is a solid state receiver/
module.
The front side mates with the i2 Micro iCon ITA. Wires exit the i2 Micro iCon receiver
from the rear side.
Top
Numeric Keying
Receptacle
Pin 1A
Indicator
Alpha Keying
Receptacle
Bottom
Figure A. i2 Micro iCon receiver front view.
1-1
i2 MICRO iCON RECEIVER PART IDENTIFICATION
PART # 310 130 XXX
Polarizing
Feature
Latching
Feature
Figure B. i2 Micro iCon receiver side view.
For the most current information available, visit www.vpc.com
Front
Mating
Side
VIRGINIA PANEL CORPORATION
Rear
Wiring
Side
Figure C. Pin location layout.
4/23/15