Operation options
30
7.6
Navigation examples
7.6.1
Parameters with a picklist
Example: Display measured value rotated by 180°
Menu path: EF → DIS → DRO
Press or key until "DRO" is displayed.
The default setting is "NO" (display is not rotated).
Press or until "YES" appears (display is rotated by 180°).
Press to confirm the setting.
7.6.2
User-definable parameters
Example: setting the "TAU" damping parameter.
Menu path: EF → TAU
Press or key until "TAU" is displayed.
Press to set the damping (min. = 0.0 s; max.= 999.9 s).
Press or to go up or down.
Press to confirm the entry and to go to the next position.
Press to quit the setting function and to go to the "TAU" menu item.
7.7
Status LEDs
The Ceraphant also uses LEDs to signal the status:
• Two LEDs indicate the status of the switch outputs (switch output 2 can optionally be
used as a current output)
• One LED indicates if the device is switched on or if an error or fault has occurred
1
Status LED
2
Switch output LEDs
7.8
Resetting to factory settings (reset)
See parameter description for RES → 71
Ceraphant PTC31B, PTP31B, PTP33B IO-Link
2
1
E
D
R
O
N
O
Y
E
S
D
R
O
T
A
U
0. 3
0
1. 5
T
A
U
A0032027
Endress+Hauser