Volumetric Configuration - FlowLine EchoWave LG10 Series Manual

Appendix
Section Seven
VOLUMTRIC CONFIGURATION
The sensor may be configured in volumetric
units (Gallons or Liters) or Distance (Height
of Liquid) units (inches, cm, feet or meters).
®
WebCal will default to Distance (Height of
Liquid) with units of Inches. To change
units or change from Distance to Volume,
press the Volumetric Mode button as
located near the center of the window.
Note: The Volumetric Mode button will be
highlighted in Blue when a volume output is
selected.
| 38 MN300840 REV A8