Step 3 - Measure The Tank; Step 4 - Sensor Configuration - FlowLine EchoPod UG06 Series Quick Start Manual

STEP 3 - MEASURE THE TANK

Measuring the tank is one of the most important aspects
in configuring the sensor. When measuring the tank,
take into account the location of the sensor with respect
to fittings, risers, dome tops and bottoms, and identify
where the measurements are taken from the sensor.
The HEIGHT and FILL-H settings determine the 4-
20mA span and are always measured from the bottom
of the tank up.

STEP 4 - SENSOR CONFIGURATION

Configures the Loop Fail-Safe, Output at Empty and Startup Condition for the sensor.
| 4 QS310140 Rev A2