Geeetech Delta Rostock mini G2 pro Building Instructions page 73

ShenZhen GETECH CO.,LTD
GEEETECH
2） Connect heating wires for extruder 1. The wires are on hotend 1.
3） Connect heating wires for extruder 2.The wires are on hotend 2.
when connecting the wires, you need to pay attention to the correspondence of the
wires. Do not mix them up, especially the wires for heating and thermistor.
www.geeetech.com Tel: +86 755 2658 4110 Fax: +86 755 2658 4074 - 858
73