Geeetech Delta Rostock mini G2 pro Building Instructions page 56

ShenZhen GETECH CO.,LTD
GEEETECH
Step2. Fix one end of the belt on the belt mount with a M3x8mm screw and M3
washer.
Step3 Pull down another end of the belt to the pulley.
Twist the the belt around the pulley, taut the belt to the other end of the belt mount.
fix it with a M3x8mm screw and M3 washer.
*Before you cut the belt, be sure you are sure about the length, it is about 110cm.
www.geeetech.com Tel: +86 755 2658 4110 Fax: +86 755 2658 4074 - 858
56