Geeetech Delta Rostock mini G2 pro Building Instructions page 47

ShenZhen GETECH CO.,LTD
GEEETECH
Step1 Slide carriages into the 6 smooth rods separately.
Note:
*When you do this, you'd better take the top plate here to check if the long screw on
the carriage will hit on the opening of the endstop when the carriages raised up.
* If you find it difficult to slide the carriage to the rod, or it cannot slide smoothly,
you can loose the screws on the linear bearings a bit.
Step2. Put a M8 washer on each top end of the rods and cover the top plate on the
rods, screw them up with M4x 8 screws and M4 washers.
www.geeetech.com Tel: +86 755 2658 4110 Fax: +86 755 2658 4074 - 858
47