Wing nut
M3 washer
*for your convenience, the heatbed for you is pre-soldered, you can mount them
directly.
step1. Stack the heatbed and the building platform together.
Step2. Thread the M3x30mm Hex Counter-sunk-head screw through the two plates
and add washers and spring at this end.
www.geeetech.com
ShenZhen GETECH CO.,LTD
GEEETECH
NO.12
3
NO.5
6
Tel: +86 755 2658 4110
Fax: +86 755 2658 4074 - 858
21