Terminal Compartment: Close - AUMA SAEx 07.2 Operation Instructions Manual

SAEx 07.2 SAEx 16.2 / SAREx 07.2
5.2.3.

Terminal compartment: close

SAREx 16.2
In case of a fault: Hazardous voltage while protective earth conductor is NOT
connected!
Risk of electric shock.
Connect all protective earth conductors.
Connect PE connection to external protective earth conductor of connecting
cables.
Start running the device only after having connected the protective earth con-
ductor.
7. Firmly tighten protective earth to PE connection.
Figure 20: PE connection
[1] PE connection, control cable
[2] PE connection, motor cable
8. For shielded cables: Link the cable shield end via the cable gland to the housing
(earthing).
Figure 21: Close terminal compartment
[1] Cover (figure shows KP version)
[2] Screws for cover
[3] O-ring
[4] Blanking plugs
[5] Cable gland (example)
[6] Flameproof frame
1. Clean sealing faces of cover [1] and frame [6].
2. Check whether O-ring [3] is in good condition, replace if damaged.
Electrical connection
25