Setting Of Clock - Mitsubishi Electric EMU4-CNT-MB User Manual

10.2 Setting of Clock

You will set the clock of the control unit.
The clock setting is only for the parent terminal.
*This function is available when the parent terminal is in the STOP status of control operation.
If you attempt to execute it in the RUN status, a message will appear to ask whether to execute after the status is changed
to STOP.
(1) Connect the parent terminal and the computer with a LAN cable.
*Set the computer's IP address in order to be in the same network.
(2) Click the Reading button to execute the read of the parent terminal clock.
(3) The read time is displayed on the window.
If the displayed time is different from the present time, execute the same operation as (4) to (7) below.
114