Mitsubishi Electric EMU4-CNT-MB User Manual page 27

(6) Select Use the following address and enter the IP address and subnet mask.
*Write down the setting values before change because they are required when the computer's IP address is restored
to the original one.
The network address parts of the IP address must be the same values as those of the control unit.
The host address part of the IP address must be different values from that of the control unit.
Neither 0 nor 255 can be set.
*1: The network address part of an IP address is any parts that corresponds to 1 of the subnet mask when the IP
address and subnet mask are converted to binary numbers.
<Example>
Network settings of the control unit
IP address
IP address (binary numbers)
Subnet mask
Subnet mask (binary numbers)
(7) After the input, click the OK button.
The network information will be automatically updated.
Perform the operation according to the message.
Network address part
192 168
11000000 10101000
255 255
11111111 11111111
26
Host address part
3 11
00000011 00001011
255 0
11111111 00000000