(f) A value for comparison will be set for the standard measuring point.
Select constant or measurement item from the pull-down menu.
For constant, enter a value to the right.
For measurement item, select a measuring point in the same way as (b) to (d) above.
■For constant
■For measurement item
(g) Confirm the settings.
Click the OK button to close the window.
<How to set the contact state comparison>
(a) Select Comparison of contact state.
(b) Click the ... button.
(c) The following window appears.
Select a unit and its measurement item in that order to set a standard measuring point for conditional expression.
*For this setting, only EMU4-PX4, with measurement items of contact input state, is selectable.
65