Wiring for Schedule Control
Equipment A
Equipment B
Equipment C
*To comply with the UL standards, fuses must be used.
For the fuses, use P405H produced by Daito Communication Apparatus or its equivalent.
*For the wiring length between each output terminal and the equipment, refer to
Fuse 0.5 A
(+)
(-)
Contact output 1
(-)
(+)
(-)
Contact output 2
(-)
Contact output 3
(+)
(-)
(-)
23
EMU4-CNT-MB
RS-485(MODBUS RTU)
4.3.1 Precautions for Wiring.