Mitsubishi Electric EMU4-CNT-MB User Manual page 90

(2) Set each item.
Item
Validity period
Week pattern *1
Specific day pattern
Date
Day pattern *1
*To set this calendar, you must register the day pattern settings in advance. For details, refer to
Registering/Changing the Day Pattern.
Indicate the validity time period for compressor control execution.
The validity period is for two years from a start date.
The start date can be changed by clicking the Change start date button.
Set the day pattern for each day.
Right-click the field of each day to select a day pattern.
A selectable item, Clear, represents a state of no day pattern setting.
*That day is treated as a state of invalid control.
Set as necessary.
When there is a day when the control is executed different from the week pattern, set this.
Select Date and Day pattern and then click the Add button to set the pattern.
When deleting a setting, select the setting and then click the Delete button.
*When the validity period has been changed, any settings not within a new validity period
will be deleted.
Select a day to set.
Any day within the validity period is selectable.
Select a day pattern to set to the special day.
Details
89
7.8.2