Graded Test; Conconi Test - h/p/cosmos 170-190/65 Series Original Instructions Manual

18.2 Graded test

Description
(e.g. for performance diagnostics based on lactate measurement)
Refer to "test mode" for safety information and adjustment.
Parameter
Starting speed
Increment
Acceleration level
Step length
Break time
Each parameter is adjustable.
STOP must be activated manually by the medical doctor.
Skip remaining break time:
Press "start" once restart after countdown
Press "start" twice restart immediately
Prolong break:
Press "-" within break "pause" is indicated
Press "start" to continue test continues with remaining break time

18.3 Conconi test

Description
(e.g. for performance diagnostics based on heart rate measurement)
Refer to "test mode" for safety information and adjustment.
Endurance test (max. heart rate test)
Standard load profile:
Starting speed: 8.0 km/h, must be changed according to the condition
❚
of the subject
Circuit (lap length): 200 m (can be changed)
❚
Increment: 0.5 km/h (can be changed)
❚
STOP must be activated manually by the medical doctor
© 1988 - 2019 h/p/cosmos sports & medical gmbh
Default value
8.0 km/h
2.0 km/h
4
3:00 min
0:30 min
cos105000_170-190_65, rev. 1.03
Illustration
Illustration
page 74 of 99