Annex Iii (Accessories); Pc-Software Para Control [Cos10071-V4.1.0] - h/p/cosmos 170-190/65 Series Original Instructions Manual

19 Annex III (Accessories)

PC-software para control [cos10071-v4.1.0]

Title
Short description
Illustration
Application
Additional safety information
Technical data
Additional accessories
Installation
Further information
© 1988 - 2019 h/p/cosmos sports & medical gmbh
Description
The h/p/cosmos para control is designed for remote control of medical devices.
But it does not perform medical diagnosis or evaluation.
The read out data shall not be the basis for diagnosis or evaluation.
For remote control of all h/p/cosmos running machine and ladder-ergometers with
MCU2, MCU3, MCU4 and MCU5. The parameters and the keyboard of the treadmill
are displayed on the PC and keys can be simulated for remote control of the running
machine or the ladder ergometer.
See separate instructions for use.
See separate instructions for use.
Min. processor: Pentium IV
OS Windows XP / Vista / 7
RAM 1 GB (2 GB recommended)
Free HD 200 MB
Resolution 1280 x 1024
Microsoft .NET Framework 3.5 Service Pack 1
Microsoft DirectX 9.c
®
cos12769-01 USB-RS232 converter
cos00097010034 Interface connection cable RS 232 5 m
cos00097010035 Interface connection cable RS 232 10 m
By operator
Install from h/p/cosmos media stick or download from website (see below).
https://www.hpcosmos.com/en/products/software/hpcosmos-para-control-410
cos105000_170-190_65, rev. 1.03 page 80 of 99