Lubrication - h/p/cosmos 170-190/65 Series Original Instructions Manual

Description Illustration
Perform a functional check of all safety equipment:
5. Fall prevention
6. Pull cord safety stop
7. Emergency off button on UserTerminal
8. Further safety equipment
If there is any visible or assumed defects or malfunctions, unplug
device, exclude reconnection and call h/p/cosmos service
personnel.

11.3 Lubrication

Description Illustration
When OIL message occurs, check the oil film on the running
belt. Do the same if there are dry grinding noises during
operation.
The OIL messages occurs every 1000 km by default.
The oil interval may be varied, depending on environmental
conditions and use.
Unplug the treadmill.
Move one hand / tissue for 1 m through the center between
running belt and running deck.
A slight film of oil must remain on the hand.
If the running belt is too dry, it must be lubricated.
For further and precise analysis a detailed instruction regarding the
tissue lubrication test is available at service@hpcosmos.com.
Fill the syringe with 10 ml of the lubricant (h/p/cosmos special
oil, only).
Pump the lubricant under the running belt very slowly and
remove the syringe.
© 1988 - 2019 h/p/cosmos sports & medical gmbh cos105000_170-190_65, rev. 1.03 page 49 of 99