Interfere With Automatic Program - h/p/cosmos 170-190/65 Series Original Instructions Manual

8.7 Interfere with automatic program

Basic functions
Alter speed
Press "+" or "-".
Decelerate to 0 km/h to pause the
operation (see "pause function").
Alter elevation
Press "up" or "down".
Switch between modes
Press "enter" together with "+" or
"-".
Profile or test mode:
Switch between steps
Press "enter" together with "up" or
"down".
Cardio mode only:
Change heart rate upper limit
Press "enter" together with "up" or
"down".
© 1988 - 2019 h/p/cosmos sports & medical gmbh
Buttons / displays
cos105000_170-190_65, rev. 1.03
Further information
Profile / test mode:
Only valid for current step.
Cardio mode:
Reduce the speed with "-" or
exceed the max. speed with "+";
This sets a new max. speed
Profile / test mode:
Only valid for current step.
Switch to automatic mode:
Further settings are necessary to
continue.
Heart rate lower limit follows
according to initial range.
page 40 of 99