Download  Print this page

Maintenance Schedule - Husqvarna Rider 111 B Workshop Manual

Hide thumbs

Advertisement

Delivery and dealer service
The following is a list of the maintenance which should be conducted on the machine. Most of the points that
are not covered by this workshop manual are covered by the operator's manual.
Maintenance
Check the oil level in the engine
Check the engine's cooling air intake
Check the fuel pump's air fi lter
Check the steering wires
Check the brakes
Check the battery
Check the safety system
Check the screws and nuts
Check if there is any fuel or oil leakage
Clean around the muffl er and the engine
Change engine oil
1)
Clean the air fi lter and the pre-fi lter
Check the mower deck (visual inspection)
Check the tyre pressures
Lubricate the belt tensioner
Lubricate joints and axles
Adjust the brakes
Check the V-belts
Check the transmission's cooling fi ns
Clean the engine's cooling air intake
Check and adjust the throttle wire
Clean the cooling fi ns on the engine and transmission
Check the muffl er and its spark arrester
Check and adjust the settings of the cutting deck
Replace the air fi lter's pre-fi lter and paper fi lter
Replace the fuel fi lter
Replace the spark plug
1)
First change after 8 hours. Replace after every 25 hours with heavy loads and high temperatures.
be carried out more frequently in dusty conditions.
authorised service workshop.
● = Described in this Workshop Manual.
❍ = Not described in this Workshop Manual.
▼ = Described in the Operating Instructions.
WARNING!
No service procedures must be conducted on the engine or cutting unit unless:
• The engine is switched off.
• The ignition key is removed.
• The ignition cables are removed from the plugs.
• The parking brake is applied.
• The cutting unit is disengaged.
8
– English

Maintenance schedule

2)
3)
3)
2)
3)
The machine should be lubricated twice a week if used daily.
Daily
maintenance
Page
before
starting
11
-
-
19
23
10
-
-
-
-
19
-
-
12
-
-
23
-
-
-
-
2,4)
-
-
-
-
-
-
Maintenance interval in
hours
25
100
50
1)
1)
2)
Cleaning and replacing should
4)
Carried out by

Advertisement

loading

This manual is also suitable for:

Rider 111 b5