Husqvarna Rider 111 B Workshop Manual page 29

8 Pull off belt 2 from the transmission, fi rst from the
rear deck belt pulley and then from the front.
2 1
9 Loosen belt 3 (cutting deck drive) from the
tension roll. Then pull it off from the centre belt
pulley, then from the belt pulley of the articulated
steering.
10 Remove the rear attachments of both steering
3
11 Loosen the articulated shaft's screw from below.
Rider 111 B5
12 On Rider 111 B5, two belt guides (1) must be
cables.
1
removed, which means the muffl er (2) must be
removed as well.
Fold the plate (3) out of the way.
Reparation instructions
2
3
1
27
English –