Replacing Belt 4, As Far As The Cutting Deck - Husqvarna Rider 111 B Workshop Manual

9 Secure the hydrostatic cable with plastic ties in
the frame in front of the rear wheel.
10 Fasten the frame cover and the front cover.

Replacing belt 4, as far as the cutting deck

Starting point when Removing the belt:
• A deck is not mounted on the machine.
• The front part of the belt hangs loose.
• The lifting lever is folded.
1 Jack up the front carriage and remove the left
front wheel.
2 Remove the side cover. One screw at the side
and one at the top, under the seat.
3 Remove the lifting chain from the lever arm of
the cutting deck.
Reparation instructions
35
English –