Jumpers And Connectors - Supermicro Supero C9Z390-CGW Quick Reference Manual

P c
ackage ontents
• One (1) Supermicro Motherboard
• Four (4) SATA Cables
• One (1) I/O Shield

Jumpers and Connectors

Jumper
CLEAR CMOS
J9701/J9702
JI2C1/JI2C2
JPME2
JWD1
POWER BUTTON
RESET BUTTON
Connector
12V_PUMP_PWR1
AUDIO FP
B1
COM1
CPU_FAN1/FAN2
CPU SLOT1 PCI-E 3.0 x4
CPU SLOT3 PCI-E 3.0 x8
(IN x16)
CPU SLOT6 PCI-E 3.0 x16
PCH SLOT2/4/5 PCI-E
3.0 x1
HD AUDIO
HDMI/DP1, DP2
I-SATA0~5
JD1
JF1
JL1
JPW1
JPW2
JRLED1/JRLED2
JRLED3/JRLED4
JSD1
JSPDIF_OUT
JSTBY1
JTPM1
JVR2
KB/MOUSE
LAN1/LAN2
PCI-E M.2-E1
PCI-E M.2-M1/M.2-M2
SYS_FAN1/FAN2/FAN3
USB 0/1
USB 2/3
USB 4/5, 6/7
USB 8/9
USB 10
Description
Clear CMOS Button
Manufacturing Mode
SMB to PCI-E Slots
Intel® Manufacturing Mode
Watch Dog Function Enable
Internal Power Button
Onboard System Reset Button
Connectors
12V power connector for CPU pump of liquid cooling
Front Panel Audio Header
Onboard Battery
COM1 Header
CPU Fan Headers
PCI-Express x4 Slot (PCI-E 3.0 x4 link)
*CPU Slot3 PCI-E 3.0 x8 (IN x16) slot and CPU Slot1 PCI-E 3.0 x4 slot share the same PCI-Ex16 link with CPU
Slot6 PCI-E 3.0 x16 slot. CPU Slot6 PCI-E 3.0 x16 slot and CPU Slot3 PCI-E 3.0 x8 (IN x16) slot will change to
PCI-E 3.0 x8 link and PCI-E 3.0 x4 link respectively when an add-on card is installed in CPU Slot1 PCI-E 3.0 x4
slot
PCI-Express x16 Slot (PCI-E 3.0 x8 link)
*CPU Slot3 PCI-E 3.0 x8 (IN x16) slot shares a PCI-E x16 link with CPU Slot6 PCI-E 3.0 x16 slot, therefore CPU
Slot6 PCI-E 3.0 x16 slot will change to PCI-E 3.0 x8 link when a graphics card is installed in CPU Slot3 PCI-E 3.0
x8 (IN x16) slot
PCI-Express x16 Slot (PCI-E 3.0 x16 link)
*Always plug in one graphics card in CPU Slot6 PCI-E 3.0 x16 slot first to maximize performance
PCI-Express x1 Slot (PCI-E 3.0 x1 link)
High Definition Audio
Back Panel High Definition Multimedia Interface/Display Ports
(Intel® Z390) Serial ATA (SATA 3.0) Port 0~5 (6Gb/sec)
External Speaker Header
Front Control Panel Header
Chassis Intrusion Header
24-pin ATX Main Power Connector (Required)
8-pin CPU Power Connector (Required)
JRLED1 connects to I/O cover's RGB board, JRLED2 connects to PCH RGB board
(5V)
External 12V RGB strip Headers
*Please see page7 for RGB LED light strip installation
SATA DOM (Disk-On-Module) Power Connector
Sony/Philips Digital Interface (S/PDIF) Out Header
Standby Power Header
Trusted Platform Module (TPM) Header
Header for Manufacturing purpose
PS/2 Keyboard/Mouse Port
RJ45 GbE/10GbE LAN Ports
M.2 E-key Connector (Pre-installed Intel Wireless-AC 9560 WIFI module)
PCI-E M.2 Connectors (Small form factor devices and other portable devices for high
speed NVMe SSDs)
System Fan Headers
Front Panel Universal Serial Bus (USB) 2.0 Header (Black)
Back Panel Accessible USB 3.1 Gen1 Ports (Blue)
Back Panel Accessible USB 3.1 Gen2 Ports, USB4/6/7: TypeA, USB5: TypeC (Red)
Front Panel USB 3.1 Gen1 Header (Black)
Front Panel USB 3.1 Gen2 Header (Black)
• One (1) Quick Reference Guide
• One (1) Driver CD
• Two (2) Antennas (C9Z390-CGW only)
Jumpers
Push Button Switch
1-2: Normal
Open: Disable
1-2: Normal
1-2: Reset
Push Button Switch
Push Button Switch
Description
Default