Jumpers And Connectors - Supermicro X12SAE-5 Quick Reference Manual

P c
ackage ontents
• One Supermicro Motherboard
• Four SATA Cables
• One I/O Shield

Jumpers and Connectors

Jumper
JBT1
JD1
JPAC1
JPG1
JPL1, JPL2
JPME2
JWD1
Connector
12V_PUMP_PWR1
AUDIO
AUDIO_FP
BT1
COM1
CPU_FAN1, CPU_FAN2
CPU SLOT4
CPU SLOT7
DP / HDMI
DVI
I-SATA0 - I-SATA5
IPMI_LAN
JF1
JL1
JLED1
JPI2C1
JPW1
JPW2
JSD1
JSTBY1
JTPM1
LAN1, LAN2
MH10, MH11, MH14, MH15
PCI-E_M.2-M1
PCI-E_M.2-M2
PCI-E_M.2-M3
PCH SLOT2, PCH SLOT5
SLOT1 PCI 33MHZ
SP1
SYS_FAN1 - SYS_FAN3
UID
USB0/1
USB2/3
USB4, USB5, USB6, USB7
USB8
USB9
VGA
Description
Clear CMOS (Onboard)
Speaker / Buzzer
HD Audio Enable/Disable
VGA Enable/Disable (X12SCA-5F only)
LAN1/LAN2 Enable/Disable
ME Manufacturing Mode
Watch Dog Function Enable
Connectors
12V 4-pin Power Connector for CPU Liquid Cooling Pump
Back Panel High Definition Audio Ports
Front Panel Audio Header
Onboard Battery
COM Port Header
CPU Fan Headers
PCIe 4.0 x8 (IN x16) Slot
PCIe 4.0 x16 Slot
* For Intel® Xeon® W-1200 and 10th Generation Intel Core™ i series processors, both CPU SLOT4 and SLOT7 will oper-
ate at Gen. 3.
Back Panel DisplayPort / High Definition Multimedia Interface
Digital Video Interface (DVI-D)
Intel Serial ATA (SATA 3.0) Ports (6 Gb/second)
Dedicated IPMI LAN Port (X12SCA-5F only)
Front Control Panel Header
Chassis Intrusion Header
3-pin Power LED Header
Power Supply SMBus I C Header
2
24-pin ATX Main Power Connector (Required)
+12V 8-pin CPU Power Connector (Required)
SATA DOM (Disk-On-Module) Power Connector
Standby Power Header (5V)
Trusted Platform Module (TPM)/Port 80 Header
LAN1: RJ45 1 Gb LAN Port, LAN2: RJ45 2.5 Gb LAN Port
M.2 Mounting Holes
PCIe 3.0 x4 M.2 M-key Socket (Supports 22110/2280 form factors, RAID 0/1)
(Small form factor devices and other portable devices for high speed NVMe SSDs)
PCIe 3.0 x4 M.2 M-key Socket (Supports 2280 form factor, RAID 0/1)
PCIe 4.0 x4 M.2 M-key Socket (Supports 2280 form factor)
* For Intel Xeon W-1200 and 10th Gen. Intel Core i series processors, PCI-E_M.2-M3 will be disabled.
PCIe 3.0 x1 Slots
PCI Slot, 32 Bit/33 MHz with 5V Single Voltage
Internal Speaker/Buzzer
System Fan Headers
Unit Identifier (UID) Switch (X12SCA-5F only)
Front Access USB 2.0 Header
Front Access USB 3.2 Gen. 2x1 Header (5 Gb, Type-A)
Back Panel USB 3.2 Gen. 2x1 Ports (10 Gb, Type-A)
Back Panel USB 3.2 Gen. 2x2 Port (20 Gb, Type-C)
Front Access USB 3.2 Gen. 2x2 Header (20 Gb, Type-C)
VGA Port (X12SCA-5F, IPMI only)
• One Quick Reference Guide
Jumpers
Description
Default
Short Pads to Clear CMOS
Pins 1-4: External Speaker
Pins 3-4: Buzzer
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Reset)