Jumpers And Connectors - Supermicro C7Z270-CG-M Quick Reference Manual

P c
ackage ontents
• One (1) Supermicro Motherboard
• Four (4) SATA Cables, One (1) I/O Shield
• One (1) Quick Reference, One (1) Driver CD, One(1) SLI cable

Jumpers and Connectors

Jumper
Clear CMOS Clear CMOS Button
JBR1 BIOS Recovery
JBT1 Clear CMOS (on board)
JI2C1/JI2C2 SMB to PCI-E Slots
JPME2 Intel® Manufacturing Mode
JPUSB1 USB Wake Up Enable
JWD1 Watch Dog Function Enable
Power Button Internal Power Button
Reset Button Onboard System Reset Button
Connector
AUDIO FP
BT1
COM1
I-SATA0~5
JD1
JF1
JL1
JPW1
JPW2
JSD1
JSPDIF_OUT
JSTBY1
JTPM1
PCI-E M.2 CONNECTOR 1, 2
Sys Fan 1, 2 CPU Fan 1, 2
TH1
USB 0/1
USB 8/9 (3.0)
Jumpers
Description
Connectors
Front Panel Audio Header
Onboard Battery
COM1 Port Header
(Intel Z270) Serial ATA (SATA 3.0) Ports 0~5 (6Gb/sec)
Pin 1~4: External Speaker
Front Panel Control Header
Chassis Intrusion Header
24-pin ATX Main Power Connector (Required)
8-pin CPU power Connector (Required)
SATA DOM (Disk On Module) Power Connector
Sony/Philips Digital Interface (S/PDIF) Out Header
Standby Power Header
Trusted Platform Module (TPM) Header
PCIE M.2 Connectors 1 and 2, small form factor devices and other
portable devices for High speed NVMe SSDs
System/CPU Fan Headers
Header for a thermistor type sensor
Front Panel Accessible USB 2.0 Headers
Front Panel Accessible USB 3.0 Header
Default
Push Button
Pin 1-2 (Normal)
Short pads to clear CMOS
Open
Pin 1-2 (Normal)
Pin 1-2 (Enable)
Pin 1-2 (RST)
Push Button
Push Button
Description