Jumpers And Connectors - Supermicro Supero C9Z390-PGW Quick Reference Manual

P c
ackage ontents
• One (1) Supermicro Motherboard
• Four (4) SATA Cables
• One (1) I/O Shield

Jumpers and Connectors

Jumper
CLEAR CMOS Clear CMOS Switch
JI2C1/JI2C2 SMB to PCI Slots
JPAC1 Audio Enable/Disable
JPME2 Intel® Manufacturing Mode
JWD1 Watch Dog Function Enable
POWER BUTTON Internal Power Button
RESET BUTTON Onboard System Reset Button
Connector
12V_PUMP_PWR1
AUDIO FP
B1
COM1
CPU SLOT1/SLOT5 PCI-E 3.0 x8
(IN x16)
CPU SLOT3/SLOT7 PCI-E 3.0 x16 PCI-Express x16 Slots (PCI-E 3.0 x16 link)
PCH SLOT4 PCI-E 3.0 x1
HD AUDIO
HDMI/DP1, DP2
I-SATA0~5
JD1
JF1
JL1
JLED1
JPW1
JPW2
JRLED1/JRLED2
JRLED3/JRLED4
JSD1
JSTBY1
JTPM1
KB/MOUSE
LAN1/LAN2
PCIE M.2-E1
PCIE M.2-M1/M.2-M2
SYS_FAN1/FAN2/FAN3, CPU_
FAN1/FAN2
U.2-1/U.2-2
USB 0/1
USB 2/3
USB 4/5, 6/7
USB 8
USB 9/10
• One (1) Quick Reference Guide
• One (1) Driver CD
• Two (2) Antennas
Jumpers
Description
Connectors
12V 4-pin power connector for CPU pump of liquid cooling
Front Panel Audio Header
Onboard Battery
COM1 Header
PCI-Express x16 Slots (PCI-E 3.0 x8 link )
*CPU Slot1/Slot5 PCI-E 3.0 x8 (IN x16) slot shares PCI-E x16 link with CPU Slot3/Slot7 PCI-E 3.0 x16
slot, therefore CPU Slot3/Slot7 PCI-E 3.0 x16 link will change to PCI-E 3.0 x8 link when one graphics
card is installed in CPU Slot1/Slot5 PCI-E 3.0 x8 (IN x16) slot
*Always plug in one graphics card in CPU Slot3/Slot7 PCI-E 3.0 x16 slot first to maximize performance
PCI-Express x1 Slot (PCI-E 3.0 x1 link)
High Definition Audio
Back Panel High Definition Multimedia Interface/Display Ports
(Intel® Z390) Serial ATA (SATA 3.0) Ports 0~5 (6Gb/sec)
Speaker/Buzzer (Pins 1~4: External Speaker, Pins 3~4: Buzzer)
Front Control Panel Header
Chassis Intrusion Header
Power LED Indicator Header
24-pin ATX Main Power Connector (Required)
+12V 8-pin CPU power Connector (Required)
JRLED1 connects to I/O cover's RGB board; JRLED2 connects to PCH RGB
board
External 12V RGB strip Headers
*Please see page 7 for RGB LED light strip installation
SATA DOM (Disk-On-Module) Power Connector
Standby Power Header
Trusted Platform Module (TPM) Header
PS/2 Keyboard/Mouse Port
RJ45 1GbE/10GbE LAN Ports
PCI-E M.2 E1 key connector for WIFI module (Pre-installed)
PCI-E M.2 Connectors M1 and M2, small form factor devices and other
portable devices for high speed NVMe SSDs
*M.2-M1 port shares lanes with U.2-1 port; M.2-M2 port shares lanes with I-SATA4/I-SATA5
*RAID 0,1
System/CPU Headers
U.2 Connector 1 and 2 for 2.5" SSD Drives
*U.2-1 port shares lanes with M.2-M1 port
*RAID 0,1
Front Panel Accessible USB 2.0 Header (Black)
Back Panel USB 3.1 Gen1 Ports (Blue)
Back Panel USB 3.1 Gen2 Type A Ports 4/6/7, USB 3.1 Type C Port 5 (Red)
Front Panel Accessible USB 3.1 Gen2 Header 8 (Type C)
Front Panel Accessible USB 3.1 Gen1 Headers 9/10 (Black)
Default
Push Button Switch
Open (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (RST)
Push Button Switch
Push Button Switch
Description