Table of Contents
Advertisement
P
c
ackage
ontents
• One Supermicro Motherboard
• One Quick Reference Guide
• One I/O Shield
• Six SATA Cables
Jumpers and Connectors
Jumper
JBT1
JPAC1
JPL1, JPL2
JPME2
JPUSB1
JWD1
Connector
12V_PUMP_PWR1
AUDIO FP
BATTERY
COM1
CPU SLOT1/3/4/5/6/7
FAN1 – FAN6
FANA – FAND
HD AUDIO
JD1
JF1
JL1
JOH1
JPI2C1
JPW1
JPW2, JPW3, JPW4
JRK1
JSD1
JSPDIF_OUT
JSTBY1
JTPM1
JUIDB1
LAN1
LAN2
M.2-C01 – M.2-C04
SATA0 – SATA7
SP1
U.2-1, U.2-2
USB0/1
USB2, USB3
USB4/5
USB6, USB7, USB8, USB9
USB10
USB11
VGA
• One GPU to CPU Power Cable
• One E1A Carrier for Intel 112L XCC CPU
• One E1B Carrier for Intel 64L MCC CPU
Description
Clear CMOS (Onboard)
HD Audio Enable/Disable
LAN1/LAN2 Enable/Disable
Intel Manufacturing Mode
USB8/9 Standby Power
Watchdog Function Enable
Connectors
12V 4-pin Power Connector (for CPU liquid cooling pump)
Front Panel Audio Header
Onboard Battery
Back Panel COM Port
PCIe 5.0 x16 Slots
* For 64L CPU, only SLOT3/5/7 are supported.
CPU Fan Headers
System Fan Headers
Back Panel High Definition Audio Ports
Speaker/Buzzer Header
Front Control Panel Header
Chassis Intrusion Header
Overheat LED Header
Power Supply SMBus I
C Header
2
24-pin ATX Main Power Connector (Required)
+12V 8-pin CPU Power Connectors
Intel VROC RAID Key Header
* A VROC hardware key is required for VROC RAID function.
SATA Disk-On-Module (DOM) Power Connector
Sony/Philips Digital Interface (S/PDIF) Out Header
Standby Power Header (5V)
Trusted Platform Module (TPM)/Port 80 Header
* If CPU SLOT1 is to be installed with a full-length PCIe card, please use a horizontal TPM module for JTPM1 to prevent
mechanical conflict.
Unit Identifier (UID) Switch / BMC Reset Button
RJ45 1GbE LAN Port (Shared IPMI LAN port)
RJ45 10GbE LAN Port
PCIe 5.0 x4 M.2 M-key Sockets (Support 22110/2280 form factors and RAID 0/1/5/10)
* Please use wide temperature (up to 85
Intel SATA 3.0 Ports (6Gb/second) (Support RAID 0/1/5/10)
Internal Speaker/Buzzer
PCIe 3.0 x4 U.2 Connectors for NVMe 2.5" SSD Drives (Support RAID 0/1)
Front Access USB 2.0 Header
Back Panel USB 2.0 Ports (Type-A)
Front Access USB 3.2 Gen. 1 Header (5Gb, Type-A)
Back Panel USB 3.2 Gen. 2x1 Ports (10Gb, Type-A)
Back Panel USB 3.2 Gen. 2x2 Port (20Gb, Type-C)
Front Access USB 3.2 Gen. 2x2 Header (20Gb, Type-C)
VGA Port (IPMI only)
Jumpers
Description
C) M.2 devices for M.2-C03 and M.2-C04
o
Default Setting
Short Pads to Clear CMOS
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
.
Advertisement
Table of Contents
