Jumpers And Connectors - Supermicro C7B250-CB-ML Quick Reference Manual

P c
ackage ontents
• One (1) Supermicro Motherboard
• Two (2) SATA cables
• One (1) I/O Shield

Jumpers and Connectors

Jumper
JCMOS Clear CMOS
JBR1 BIOS Recovery
JBT1 Clear CMOS (onboard)
JI2C1/JI2C2 SMB to PCI-E Slots
JPME2 Intel
JPUSB1 USB Wake Up Enable (Back Panel USB 0/1)
JWD1 Watch Dog Function Enable
Connector
AUDIO FP
BT1
COM1
CPU_FAN1
I-SATA0~5
JD1
JF1
JL1
JPW1
JPW2
JSD1
JSPDIF_OUT
JSTBY1
JTPM1
PCI-E M.2 CONNECTOR 1
SYS_FAN1/FAN2
USB 2/3
USB 8/9 (3.0)
Jumpers
Description
Manufacturing Mode
®
Connectors
Front Panel Audio Header
Onboard Battery
COM1 Port Header
CPU Fan Headers
(Intel PCH) Serial ATA (SATA) 3.0 Ports 0~5 (6Gb/sec)
®
Pin 1~4: External Speaker
Front Control Panel Header
Chassis Intrusion Header
24-pin ATX Power Connector (Required)
8-pin CPU Power Connector (Required)
SATA DOM (Disk On Module) Power Connector
Sony/Philips Digital Interface (S/PDIF) Out Header
Standby Power Header
Trusted Platform Module (TPM) Header
PCI-E M.2 Connector 1. Small form factor devices and other portable devices for
high speed NVMe SSDs
System Fan Headers
Front Panel Accessible USB 2.0 Header
Front Panel Accessible USB 3.0 Header
• One (1) Quick Reference Guide
• One (1) Driver CD
Default
1-2: Normal
1-2: Normal
Short pads to clear CMOS
On: Enable
1-2: Normal
1-2: Enable
1-2: RST
Description