Jumpers And Connectors - Supermicro X12SAE Quick Reference Manual

P c
ackage ontents
• One (1) Supermicro Motherboard
• Four (4) SATA Cables

Jumpers and Connectors

Jumper
JBT1 Clear CMOS (onboard)
Speaker
JD1
Buzzer
JPAC1 Audio Enable
JPG1 VGA Enable (for X12SCA-F only)
JPL1/2 LAN1/LAN2 Enable/Disable
JPME2 Intel Manufacturing Mode
JWD1 Watch Dog Function Enable
Connector
12V_PUMP_PWR1
AUDIO
AUDIO FP
B3
COM1
CPU_FAN 1 ~ CPU_FAN 2
CPU SLOT4 PCI-E 3.0 x8 (INx16)
CPU SLOT6 PCI-E 3.0 x16
DP/HDMI
DVI
I-SATA0~3
IPMI_LAN
JF1
JL1
JLED1
JPI2C1
JPW1
JPW2
JSD1
JSTBY1
JTPM1
LAN1/2
PCH SLOT2 PCI-E 3.0 x4
PCH SLOT3 PCI-E 3.0 x1
PCI-E_M.2-M1, M2
SLOT1 PCI 33MHz
SP1
SYS_FAN1 ~ SYS_FAN3
UID
USB0/1
USB2/3
USB4/5
USB6/7
USB8/9
USB10
VGA
• One (1) I/O Shield
• One (1) Quick Reference Guide
Jumpers
Description
Connectors
12V 4-pin Power Connector for CPU Liquid Cooling Pump
High Definition Audio Ports (Back Panel)
Front Panel Audio Header
Onboard Battery
COM Header
CPU Fan Headers
PCIe 3.0 x16 Slot (PCIe 3.0 x8 link)
PCIe 3.0 x16 Slot (PCIe 3.0 x16 link) or PCIe 3.0 x8 (when CPU Slot4 is
Populated)
DisplayPort Connector/High Definition Multimedia Interface (HDMI)
Digital Video Interface (DVI-D)
Intel Serial ATA (SATA 3.0) Ports 0~3 (6Gb/sec)
Dedicated IPMI LAN Port (for X12SCA-F only)
Front Control Panel Header
Chassis Intrusion Header
3-pin Power LED Header
Power Supply SMBus I2C Header
24-pin ATX Main Power Connector (Required)
+12V 8-pin CPU Power Connector (Required)
SATA DOM (Disk On Module) Power Connector
Standby Power Header (5V Standby Header)
Trusted Platform Module (TPM) Header (Supports TPM 2.0 only)
LAN1: 1Gb/LAN2: 2.5Gb
PCIe 3.0 x4 Slot
PCIe 3.0 x1 Slot (for X12SAE only)
PCIe M.2 Connectors 1 and 2 (PCIe 3.0 x4 link), Small Form Factor
Devices and Other Portable Devices for High Speed NVMe SSDs
PCI Slot, 32 Bit/33MHz with 5V Single Voltage
Internal Speaker/Buzzer
System Fan Headers
Unit Identifier (UID) Switch (for X12SCA-F only)
Front Access USB 2.0 Header
Back Panel USB 3.2 Gen 1 Ports (Type A)
Front Access USB 3.2 Gen 1 Header
Back Panel USB 3.2 Gen 2 Ports (USB6: Type C, USB7: Type A)
Back Panel USB 3.2 Gen 2 Ports (Type A)
Front Panel Accessible USB 3.2 Gen 2 20-pin Connector
VGA Port (for X12SCA-F, IPMI only)
Default
Short Pads to Clear CMOS
Pins 1-4: External Speaker
Pins 3-4: Buzzer
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (RST)
Description